--- title: "msm ip-security-policy clear" slug: "msm-ip-security-policy-clear" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:03Z published: 2026-08-04T17:23:03Z canonical: "docs.trellix.com/msm-ip-security-policy-clear" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # msm ip-security-policy clear Use this command to clear all of the IP security policy settings. Typically, an administrative user with write access to the **System > Settings** page can change or delete any individual IP address or IP subnet address in the IP Security Policy area of the page. If all administrative users are locked out of the MTP Management Appliance, an MX Series appliance administrator can clear all of the addresses. ### Syntax ``` msm ip-security-policy clear ``` ### Parameters None. ### Example The following example clears all IP security policy setting settings. ``` hostname (config) # msm ip-security-policy clear ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:**Trellix MTP Management Appliance Release 2.0.1.