--- title: "msm mgmt-interface gw <ipAddress>" slug: "msm-mgmt-interface-gw-ipaddress" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:03Z published: 2026-08-04T17:23:03Z canonical: "docs.trellix.com/msm-mgmt-interface-gw-ipaddress" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # msm mgmt-interface gw <ipAddress> Use this command to specify the default gateway for **ether2** (if cabled and configured). By default, **ether2** is not used. If you need to physically segregate MTP management traffic, you can use **ether2**. In order to enable MTP management on the secondary interface, **ether2** must be administratively enabled, and it must be configured with an IP address and default gateway on a reachable network. To view the default gateway IP address for ether2, use the **show interfaces ether2** command. ### Syntax ``` msm mgmt-interface gw ``` ### Parameters `<ipAddress>` The IP address of the default gateway for the **ether2** management interface. Default value: 0.0.0.0 ### Examples The following example specifies the host at 10.11.43.1 as the default gateway for **ether2**. ``` hostname (config) # msm mgmt-interface gw 10.11.43.1 ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:**Trellix MTP Management Appliance Release 2.0.2.