--- title: "mtp enable" slug: "mtp-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:03Z published: 2026-08-04T17:23:03Z canonical: "docs.trellix.com/mtp-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # mtp enable Enables Trellix Mobile Threat Prevention (MTP) Cloud integration with the Network Security appliance. To use FireEye MTP Cloud integration, the Network Security appliance must be deployed in TAP mode or in inline mode. When integration is enabled, the appliance looks up the MD5 checksum of each APK file through the AV-Suite analysis tool. The appliance submits the APK file for static analysis to the MTP Cloud. The MTP Cloud analyzes the APK file and returns its analysis to the appliance. When the appliance generates an alert, the alert is marked as a mobile alert. If the APK file is detected as malicious, the Network Security appliance generates a malicious mobile alert. The alert is displayed with a Mobile badge in the **Alerts** > **Alerts** page of an Network Security appliance. MTP Cloud integration is enabled by default. For details about MTP Cloud integration, refer to the *Network Security User Guide.* ### Syntax `[no] mtp enable` ### Parameters `no` Use the no form of this command to disable MTP Cloud integration. ### Example The following example enables MTP Cloud integration on the appliance: ``` hostname (config) # mtp enable ``` ### User role Admin and Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 7.7