--- title: "mvx analysis riskware policy rule * enable" slug: "mvx-analysis-riskware-policy-rule-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:03Z published: 2026-08-04T17:23:03Z canonical: "docs.trellix.com/mvx-analysis-riskware-policy-rule-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # mvx analysis riskware policy rule * enable Enables or disables a specific riskware detection custom policy rule on the VX Series appliance. ### Syntax `[no] mvx analysis riskware policy rule * enable` Use the ‘no’ form of the command to disable a particular custom policy rule ID. ### Parameters `no` ### Example The following example enables or disables a specific riskware detection custom policy rule on the VX Series appliance. ``` hostname (config) # mvx analysis riskware policy rule * enable ``` ### User role Administrator or operator. ### Command mode Configuration. ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Intelligent Virtual Execution - Server:** Release 10.0.3