--- title: "mvx cluster enrollment-service client enable" slug: "mvx-cluster-enrollment-service-client-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:03Z published: 2026-08-04T17:23:03Z canonical: "docs.trellix.com/mvx-cluster-enrollment-service-client-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # mvx cluster enrollment-service client enable The enrollment service on a sensor must be enabled so it can submit objects to the cluster, and is enabled by default. Use this command to disable and then re-enable it. > [!WARNING] > Important > > Trellix recommends that you use this command only with guidance from Trellix Technical Support. ### Syntax `[no] mvx cluster enrollment-service client enable` ### Parameters `no` Use the `no` form of this command to disable the enrollment service on the appliance. ### Example The following example enables the enrollment service on the appliance. ``` hostname (config) # mvx cluster enrollment-service client enable ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: **Network Security:** Release 7.9.0 (sensor) **Intelligent Virtual Execution - Server:** Release 7.9.0 (broker)