--- title: "mvx cluster enrollment-service preferred name <name>" slug: "mvx-cluster-enrollment-service-preferred-name-name" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:03Z published: 2026-08-04T17:23:03Z canonical: "docs.trellix.com/mvx-cluster-enrollment-service-preferred-name-name" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # mvx cluster enrollment-service preferred name <name> Configures the preferred MVX cluster name. > [!NOTE] > Note > > Before you can enroll the appliance on an MVX cluster, you need to configure the connection between the appliance and the MVX Server. For more information, see the as described in the Distributed Network Security Cloud MVX Guide or Distributed Network Security IVX Smart Grid Guide. ### Syntax `[no] mvx cluster enrollment-service preferred name <name>` ### Parameters `no` Use the `no` form of this command to remove the preferred name. `name` The cluster name to be shown. ### Example The following example adds the preferred name `es1` to the enrollment server. ``` nx-1 (config) # mvx cluster enrollment-service preferred name es1 ``` The following example removes the preferred name from the enrollment server. ``` nx-1 (config) # no cluster enrollment-service preferred name ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: **Network Security:** Release 7.9.0 (sensor)