--- title: "mvx mode local" slug: "mvx-mode-local" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:03Z published: 2026-08-04T17:23:03Z canonical: "docs.trellix.com/mvx-mode-local" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # mvx mode local Restores the default "local" MVX mode on an integrated appliance. In local mode, the appliance uses its on-board MVX analysis engine for all detection and analysis. If you change from sensor mode to local mode, must reload the appliance for the change to take effect. > [!NOTE] > Note > > An integrated appliance is a physical appliance with an on-board MVX analysis engine. ### Syntax `mvx mode local` ### Parameters None ### Example The following example restores local mode on the ex-1 appliance. ``` ex-1 (config) # mvx mode local ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: **Email Security — Server:** Release 8.0.0 **File Protect:** Release 8.0.0 **Network Security:** Release 8.0.0 > [!NOTE] > Note > > This command replaces the `no mvx sensor enable` command, which was introduced in Network Security 7.9.0.