--- title: "mvx node broker public-address <publicIPAddress>" slug: "mvx-node-broker-public-address-publicipaddress" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:03Z published: 2026-08-04T17:23:03Z canonical: "docs.trellix.com/mvx-node-broker-public-address-publicipaddress" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # mvx node broker public-address <publicIPAddress> Configures an accessible (*public*) IP address for a broker in an internal network behind a NAT gateway. Sensors enroll with and communicate with the broker using this IP address instead of the internal IP address that sensors cannot reach. > [!NOTE] > Note > > In the `show mvx node status` and `show mvx node status full` command output, the accessible IP address is displayed in the `Broker Role` section, and the internal IP address is displayed in the `Node information` section. ### Syntax [`no`] `mvx node broker public-address <publicIPAddress>` ### Parameters `publicIPAddress` The accessible IP address. This is the virtual NAT IP address and port that a network administrator maps to the Intelligent Virtual Execution - Server internal IP address and port 22. `no` Removes a configured accessible IP address from the broker. ### Examples The following example configures 172.2.3.4 as the accessible IP address for the vx-1 broker. ``` vx-1 (config) # mvx node broker public-address 172.2.3.4 ``` The following example removes the accessible IP address from the vx-1 broker. ``` vx-1 (config) # no mvx node broker public-address ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: **Intelligent Virtual Execution - Server:** Release 8.1.0