--- title: "mvx node config cluster-if <interface>" slug: "mvx-node-config-cluster-if-interface" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:03Z published: 2026-08-04T17:23:03Z canonical: "docs.trellix.com/mvx-node-config-cluster-if-interface" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # mvx node config cluster-if <interface> Configures the cluster interface on Intelligent Virtual Execution - Server nodes in an MVX cluster. ### Syntax `mvx node config cluster-if <interface>` `no mvx node config cluster-if <interface>` ### Parameters `no` Use the `no` form of this command to clear the node's cluster interface. `interface` Name of the cluster interface. ### Example The following example configures `ether1` as the MVX cluster interface: ``` vx-1 (config) # mvx node config cluster-if ether1 ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: **Intelligent Virtual Execution - Server:** Release 7.9.0