--- title: "mvx sensor config submission-if <interface>" slug: "mvx-sensor-config-submission-if-interface" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:03Z published: 2026-08-04T17:23:03Z canonical: "docs.trellix.com/mvx-sensor-config-submission-if-interface" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # mvx sensor config submission-if <interface> Configures the submission interface on appliances that are running in MVX hybrid mode or MVX sensor mode. The appliance uses this interface to send objects to an MVX cluster for analysis. ### Syntax `mvx sensor config submission-if <interface>` `no mvx sensor config submission-if <interface>` ### Parameters `no` Use the `no` form of this command to clear the submission interface. `interface` Name of the submission interface. ### Example The following example configures `ether2` as the submission interface on nx-1. ``` nx-1 (config) # mvx sensor config submission-if ether2 ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: **Network Security:** Release 7.9.0 **Email Security — Server:** Release 8.0.0 **File Protect:** Release 8.0.0