--- title: "Network outage due to unresolved ARP traffic" slug: "network-outage-due-to-unresolved-arp-traffic-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:36Z published: 2026-11-19T12:30:36Z canonical: "docs.trellix.com/network-outage-due-to-unresolved-arp-traffic-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Network outage due to unresolved ARP traffic ### Scenario Sudden outage in the network due to unresolved ARP traffic **Applicable to Sensor models**: NS-series and Virtual IPS Sensors. **Sensor software version**:10.1, 11.1 ### Problem type to be solved Resolve the ARP traffic which is dropped by the Sensor due to heuristic web application server protection configuration setting. ### Data/Information Collection **Steps:** 1. Check if the attack **ARP MAC Address Flip-Flop** is disabled from the policy. Go to **Policy** → **Intrusion Prevention** → **Policy Types** → **IPS**. Double-click **Default Prevention** listed in **IPS** name column. Check the policy on the entire device interfaces and make sure ARP flip flop alert is either disabled or not included in the policy on the entire device interfaces. ![GUID-28AAAB06-5F09-4DCB-A7E5-34DDE3EAA169-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-9b2d16d9-eb80-113e-156e-1efa8687f322(7).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A00%3A50Z&se=2026-11-20T13%3A00%3A50Z&sr=c&sp=r&sig=Xumm0%2BiTyQM5ZDwrdvPFrBczQO8v9WBPgtwdmnOgwJA%3D) 2. Check if the **Heuristic Web Application Server Protection** is enabled. Go to **Policy** → **Intrusion Prevention** → **Policy Types** → **Inspection Options**. Double-click **** listed in **Inspection Options** page. > [!NOTE] > Note > > Check each interface of the device individually. ![GUID-910469F7-5852-4F20-9663-767C89770374-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-64157663-529c-ff95-8ff1-2a13ecdf7211(7).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A00%3A50Z&se=2026-11-20T13%3A00%3A50Z&sr=c&sp=r&sig=Xumm0%2BiTyQM5ZDwrdvPFrBczQO8v9WBPgtwdmnOgwJA%3D) 3. Check if ARP spoofing is enabled on the Sensor. Use the command `show arp spoof status`. ![GUID-0521E805-89F5-4313-A778-2C71DE39FCE9-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0fedc928-ccc7-a284-0292-3f056549ba5a(7).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A00%3A50Z&se=2026-11-20T13%3A00%3A50Z&sr=c&sp=r&sig=Xumm0%2BiTyQM5ZDwrdvPFrBczQO8v9WBPgtwdmnOgwJA%3D) ### Explanation When heuristic web application server protection is enabled, the Manager caching is disabled and only selected attacks are pushed to the Sensor. If the MAC Flip-Flop attack is not part of the attacks chosen by the user, the Sensor drops the ARP packets. This happens in scenarios such as the following: - Assignment of dynamic MAC address in the network (vmac) - For the firewall in failover mode which uses the Virtual MAC address, the IP address remains the same but the MAC address will change ### Troubleshooting Steps 1. Disable ARP spoofing on the Sensor. Use the command `arp spoof` to disable ARP spoofing. 2. Disable **Heuristic Web Application Server Protection** on the device’s individual interfaces. If the problem still persists, contact Trellix Support for further assistance.