--- title: "Network requirements" slug: "network-requirements-1" tags: ["Install and Get Started", "Helix", "Sec Ops and Analytics"] updated: 2026-09-14T13:34:39Z published: 2026-09-14T13:34:39Z canonical: "docs.trellix.com/network-requirements-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Network requirements Trellix recommends that the monitoring interface of the network sensor be attached to a network TAP. A network TAP is a hardware device placed at a specific network point that allows you to connect a third device to monitor the network traffic. If you use a network TAP, connect the monitoring interface of your network sensor to the network TAP and connect the management interface to a network segment that meets the previously outlined network firewall requirements. ![CC_TAP.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-aeed8ed6-2b5d-5ccc-2ea8-f5d8484dfd9e.jpg?sv=2026-02-06&spr=https&st=2026-11-20T08%3A50%3A16Z&se=2026-11-20T09%3A50%3A16Z&sr=c&sp=r&sig=KF8IlK0kRek3vMBI5%2Flq5Mtf44zufObC22nHr0zFB8o%3D) Alternatively, you can attach the monitoring interface to a SPAN port on a network switch. Be aware that with a SPAN port packet loss will most likely occur due to pressure on the switch's backplane as a result of traffic mirroring. Attach the management interface to a network segment that meets the previously outlined network firewall requirements. ![CC_SPAN.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-45da69d6-50fa-b9a8-f06a-612b2940314e.jpg?sv=2026-02-06&spr=https&st=2026-11-20T08%3A50%3A16Z&se=2026-11-20T09%3A50%3A16Z&sr=c&sp=r&sig=KF8IlK0kRek3vMBI5%2Flq5Mtf44zufObC22nHr0zFB8o%3D) For more information, see [Sensor Placement](/network-and-platform/docs/sensor-placement).