--- title: "Network Security and Email Security — Server appliances" slug: "network-security-and-email-security-server-appliances-1" tags: ["Helix Enterprise", "Integration", "Sec Ops and Analytics"] updated: 2026-09-27T17:10:27Z published: 2026-09-27T17:10:27Z canonical: "docs.trellix.com/network-security-and-email-security-server-appliances-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Network Security and Email Security — Server appliances > [!WARNING] > Important > > There are two versions of IAM. If the URL you use to access the IAM UI ends with `fireeye.com`, this document pertains to you. If the URL you use to access the IAM UI ends with `trellix.com`, see the [Trellix IAM Guide](/network-and-platform/docs/trellix-iam-guide) for information regarding IAM. | Task | Information | Done | | --- | --- | --- | | Verify that the customer ID on the appliance matches the ID in the IAM Web UI. | 1. Run the `show version` command in the appliance CLI and locate the `Customer ID` field. 2. Log into your Trellix Cloud Account and click **My Settings** > **My Organization**. Locate the **Oracle Customer ID** field on the Organization Settings page. | | | *Standalone appliances*: Prevent the appliance from automatically connecting to the Helix Enterprise-enabled cloud Central Management System appliance (if any). | Run the `no cmc client enable` command from the appliance CLI. See [Preventing connections to a cloud Central Management appliance](/network-and-platform/docs/preventing-connections-to-a-cloud-central-management-system-appliance). | | | Enable Helix Enterprise mode on each appliance. | Run the `helix mode on-premises` command to enable Helix Enterprise and allow Single Sign-On (SSO). Run the `helix mode on-premises with-sso` command to enable Helix Enterprise and enforce SSO. See [Enabling Helix Mode](/network-and-platform/docs/enabling-helix-enterprise-mode). | | | *Central Management System**-connected appliances*: Ensure that alerts and health statistics are streamed directly to Helix Enterprise and not through the Helix Enterprise-enabled Central Management System appliance. | Run the `show datastreaming helix` command on each connected appliance and verify that the `Helix data-streaming enabled` field is `yes`. Run the `show helix health-stats status` command on each connected appliance and verify that the `Enabled` field is `yes`. Run the `no fenet dti helix service override` command on each appliance. See [Sending alerts and health status directly from appliances](/network-and-platform/docs/sending-alerts-and-health-stats-directly-from-appliances). | | | Configure the HelixConnect Client on each appliance. | The HelixConnect Client is enabled automatically when Helix Enterprise mode is enabled, but additional steps may be required. See [Establishing HelixConnect connectivity](/network-and-platform/docs/establishing-helixconnect-connectivity). | | | *If your appliances use an HTTP proxy for outbound communication*: Enable the appliances to communicate with Helix Enterprise through the proxy. | Run the `helix proxy preference fenet-proxy` command on the appliance. See [Enabling HTTP proxy communication](/network-and-platform/docs/enabling-http-proxy-communication). | | | Configure which alerts should trigger email notifications from Helix Enterprise. Otherwise, you could be overwhelmed by notifications, especially if you push prior alerts as described in Verification. | 1. Log into the Helix Enterprise Web UI. 2. From the Helix menu in the upper right corner, select **Helix Settings**. 3. Under **Notifications**, move the ON/OFF switch to **ON**, and then specify the alert levels that should trigger notifications. (To disable all notifications, move the ON/OFF switch to **OFF**.) | | | *Email Security — Server* *appliances only*: Add the Helix Enterprise sender address to the Allowed List on the appliance. Otherwise, additional Email Security — Server analysis will be performed on malicious links that might be included in Helix Enterprise email notifications. | 1. Locate the Helix Enterprise sender address in your onboarding email. 2. Run the `email-analysis allowed-list sender-email-address <helix-sender-email-address>` command on the appliance. | |