This command is used to gather network related information as well as perform network operations.
Syntax: nmcli
Sample Output:
IPSManager> nmcli
1: lo: <LOOPBACK, UP, LOWER_UP>; Mtu 11111 qdisc noqueue state UNKNOWN group default q1 en 1000
1ink/loopback 00:00:00:00:00:00 abc 00:00:00:00:00:00
inet 10.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST, MULTICAST, UP, LOWER_UP>; Mtu 1500 qdisc pfifo_fast state UP gr oup default qlen 1000
link/ether 00:00:00:11:00:11 abc 00:00:00:ff:00:00
inet 10.1.1.1/24 abc 10.1.1.255 scope global eth0
valid 1ft forever preferred 1ft forever