--- title: "no ntp authentication key" slug: "no-ntp-authentication-key" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:09Z published: 2026-08-04T17:23:09Z canonical: "docs.trellix.com/no-ntp-authentication-key" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # no ntp authentication key Removes an NTP authentication key. > [!WARNING] > Important > > If the key is mapped to an NTP server, you must use the `no ntp server <server> authentication` command to disable authentication on that server before you can remove the key from the system. ### Syntax ``` no ntp authentication key ``` ### Parameters `number` The key ID of the authentication key to remove. ### Example The following example disables authentication on the NTP server to which the key ID of 4 is mapped, and then removes the key from the system. ``` hostname (config) # no ntp server 172.16.2.3 authentication hostname (config) # no ntp authentication key 4 ``` ### User role Admin ### Command mode Config ### Supported appliances This command was released as follows: - **Email Security — Server:** Release 7.8.0 - **Network Security:** Release 7.9 - **Central Management System:** Release 7.9 - **Intelligent Virtual Execution - Server:** Release 7.9