--- title: "no policymgr ssl-intercept network ip interface" slug: "no-policymgr-ssl-intercept-network-ip-interface" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:09Z published: 2026-08-04T17:23:09Z canonical: "docs.trellix.com/no-policymgr-ssl-intercept-network-ip-interface" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # no policymgr ssl-intercept network ip interface Deletes the network policy rule from the network port pair. For details about how to delete a rule from a network policy, see the "Configuring SSL Interception" chapter of the Network Security User Guide. ### Syntax `[no]policymgr ssl-intercept network ip <IP_address> <mask_length> {interface <port-pair-name> }` ### Parameters `<IP_address>` IPv4 source or destination address for the network policy rule. To match any IPv4 address for the network port pair, enter any. `<mask_length>` IPv4 mask length in CIDR format prefixed by a slash (for example, /24). To match any mask length, enter any. `<port-pair-name>` Network port pair designation (A through F) that is configured on the appliance interface. To specify all the network port pairs, enter ALL. ### Example The following example deletes the network policy rule from the network port pair: ``` hostname (config) # [no] policymgr ssl-intercept network ip 12.23.22.0/24 interface A ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.2.1.