--- title: "Note about upgrading the Sensor from 10.1 to 11.1" slug: "note-about-upgrading-the-sensor-from-10-1-to-11-1-1" tags: ["Install and Get Started", "IPS 11.1.x"] updated: 2026-11-19T12:53:46Z published: 2026-11-19T12:53:46Z canonical: "docs.trellix.com/note-about-upgrading-the-sensor-from-10-1-to-11-1-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Note about upgrading the Sensor from 10.1 to 11.1 If you are upgrading the Sensor from version 10.1 to 11.1, read the following sections carefully. **Interface name update in Port Throughput Usage** Starting with this release of 11.1, the Manager provides a capability to view interface name by selecting the required interface displayed at the bottom of the chart. You can access these details from **Devices** → **** → **Devices** → **** → **Troubleshooting** → **Performance Charts**. Click **Throughput** tab and select **Port Throughput Usage Mbps** from drop-down. For any selected interface, you can view the details of **Port (Interface: )**, **Port throughput rate in Mbps**, and time in **MMM DD HH:MM:SS YYYY**. This release no longer supports the following: **Support for M-series Sensors** Starting with this release of 11.1, support to add M-series Sensors has been removed as **M-series** Sensor models have reached end of life. Users with existing M-series deployments will not be able to upgrade the Manager to 11.1 without removing these Sensors from the Manager. **Support for 9.1 and 9.2 software** Starting with this release of 11.1, support for **9.1** and **9.2** software has been deprecated. Any deployments containing these software will not be supported. > [!NOTE] > Note > > If you plan to upgrade your deployments from 9.x to 11.1, you need to first upgrade your deployments to 10.1.7.65 (for Manager) and 10.1.5.190 (for Sensor) and then upgrade to 11.1. **Support for XC Clusters** Starting with this release of 11.1, creation of **XC Clusters** has been discontinued since M-series Sensors have reached EOL. **Configuration of Rate Limiting** Starting with this release of 11.1, **Rate Limiting feature** under QoS has been deprecated since M-series Sensors have reached EOL.