--- title: "Notes about upgrading from 9.1, 9.2, 10.1 to 10.1.7.55" slug: "notes-about-upgrading-from-9-1-9-2-10-1-to-10-1-7-55" tags: ["Install and Get Started", "IPS 10.1.10"] updated: 2026-09-23T09:38:00Z published: 2026-09-23T09:38:00Z canonical: "docs.trellix.com/notes-about-upgrading-from-9-1-9-2-10-1-to-10-1-7-55" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Notes about upgrading from 9.1, 9.2, 10.1 to 10.1.7.55 With this release, the Device Manager user experience is enhanced to simplify and consolidate various Sensor configuration options in a single grid available at **Devices** → **** → **Global** → **Device Manager**. A few key changes are listed below: - In the Device Manager grid view, the first column **Name** is locked to ensure the Sensor name remains visible as you scroll horizontally to view the 40+ columns of information for each Sensor. - For vNSP Clusters, the **Name** column displays the name of the member Sensors. - The following new columns are visible in Device Manager grid view for each Sensor: - **Connection Status**: Displays the status between the Sensor and the Manager. - **Channel Status**: Displays the name of the following channels and its status whether "Up" or "Down" - The following new sub-columns are visible in the **Device Details** column: - **Hardware**: Displays the current hardware version running on the Sensor. - **Reboot Status**: Displays if the Sensor requires a reboot. - **Upgrade Status**: Displays if the latest software version is installing on the Sensor or downloading the latest software version to the Manager before installing it on the Sensor. - **vNSP Cluster**: Displays the name of the vNSP Cluster. - **vNSP Probe**: Displays the vNSP Probe version running on the member Sensor. - **Cloud Cluster Id**: Displays the Cluster ID for the vNSP Clusters. - **Default Gateway**: Displays the IP address of the default gateway configured on the Sensor. - **FIPS Mode**: Displays if FIPS mode is enabled or disabled. - **Health Indicators** is renamed to **System Health** and displays the following new sub-columns: - **Overall Health**: Displays the overall health of the system. - **Internal Health**: Displays the Sensor health. - **Physical Ports**: Displays if the ports are operating normally or abnormally. - The following new sub-columns are visible in the **Faults** column: - **Total**: Displays the number of unacknowledged faults generated for the device. - **Critical**: Displays the number of critical faults generated for the device. - **Error**: Displays the number of error faults generated for the device. - **Warning**: Displays the number of warning faults generated for the device. - **Info**: Displays the number of info faults generated for the device. - **Deployment column** is renamed to **Sync** and the following changes are visible in this column: - A new sub-column**Status** displays the synchronization state of the Sensor. - The **Last Deployment** sub-column is renamed to **Last Sync**. - The **vNSP Controllers** and **vNSP Clusters** tabs are now consolidated within the **Device Manager** page. - In the top right tool bar of the Device Manager grid view, a new checkbox **Include Child Domains** is available. On selecting this checkbox, Sensors configured in the child domain are also displayed in the **Sensors** tab. - Status icons and tooltips are available for various columns to provide more information on the Sensors. - Information that is immediately available is displayed on the **Device Manager** grid view and options where the Manager is still acquiring data is displayed as loading. The page refreshes automatically once the data is available. - When you double-click a selected device in the **Sensors tab**, the **Details** panel appears on the right enabling you to view and modify the Sensor configurations. You can also view and modify these Sensor configuration options from **Devices** → **** → **Devices** → **** → **Summary**. - In the **Sensors** tab, you can click the tooltip icon for a fault to open the Faults window. The faults are displayed based on your selection in the Device Manager grid view. On selecting **Clear All Filters**, the Faults window displays all the faults generated for the selected Sensor. You can click **< Back** to return to the Device Manager grid view. - In the **Sensors** tab, you can click the links on **Inspection** and **Physical Ports** columns to directly navigate to **Layer 2 Bypass cofiguration node** and **Physical Ports** pages to modify the configurations. - Several other Sensor configuration options are available in the bottom tool bar of the Device Manager grid view: - The options ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-8D2203E5-2C86-4970-8BBE-0E051DDA1A11-low.jpg?sv=2026-02-06&spr=https&st=2026-11-20T03%3A35%3A22Z&se=2026-11-20T04%3A35%3A22Z&sr=c&sp=r&sig=fQ%2FSh9KHPOFbB9oZfLR31FZA63ocSDVBiNNcHmwgIuA%3D) and ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-C5DB3A60-0A1C-4C8F-83A6-37EAFFF00433-low.jpg?sv=2026-02-06&spr=https&st=2026-11-20T03%3A35%3A22Z&se=2026-11-20T04%3A35%3A22Z&sr=c&sp=r&sig=fQ%2FSh9KHPOFbB9oZfLR31FZA63ocSDVBiNNcHmwgIuA%3D) are available within the **Sensors** tab and **HA Pairs** tab to add and remove devices. Also, multiple devices can be deleted at the same time. - An option **Sync** is available in the **Sensors** tab to deploy configuration changes for a single device or multiple devices at the same time. - An option **Other Actions** is available in the **Sensors** tab to reboot and shut down the Sensor, reset the Sensor CLI password, upgrade the Sensor software version, and export the current sync file to the local machine when the **Sync Node** is set to **Indirect**. **Terminology updates in the UI** This release contains the following terminology updates in the Manager UI: | **Options** | **Prior to 10.1.7.55** | **10.1.7.55 and later** | | --- | --- | --- | | **Add and Remove Devices** | Go to **Devices** → **** → **Global** → **Add and Remove Devices**. | Go to **Devices** → **** → **Global** → **Device Manager**. You can ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-8D2203E5-2C86-4970-8BBE-0E051DDA1A11-low.jpg?sv=2026-02-06&spr=https&st=2026-11-20T03%3A35%3A22Z&se=2026-11-20T04%3A35%3A22Z&sr=c&sp=r&sig=fQ%2FSh9KHPOFbB9oZfLR31FZA63ocSDVBiNNcHmwgIuA%3D) and ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-C5DB3A60-0A1C-4C8F-83A6-37EAFFF00433-low.jpg?sv=2026-02-06&spr=https&st=2026-11-20T03%3A35%3A22Z&se=2026-11-20T04%3A35%3A22Z&sr=c&sp=r&sig=fQ%2FSh9KHPOFbB9oZfLR31FZA63ocSDVBiNNcHmwgIuA%3D) devices from **Sensors**, **HA Pairs**, and **Stacks** tabs. | | **Failover Pairs** | Go to **Devices** → **** → **Global** → **Failover Pairs**. | **HA Pairs** tab is added in **Devices** → **** → **Global** → **Device Manager**. | | **Deploy Pending Changes** | Go to **Devices** → **** → **Global** → **Deploy Pending Changes**. | Go to **Devices** → **** → **Global** → **Device Manager**. Select the required Sensor from the **Sensors** tab and click **Sync**. A **Sync: ** window for a single device and **Bulk Sync** for multiple devices appears. Select the configurations required and click **Sync**. | | **Reboot** | Go to **Devices** → **** → **Devices** → **** → **Maintenance** → **Reboot**. | Additionally, you can also reboot the device from **Devices** → **** → **Global** → **Device Manager**. Select the **Sensors** tab. Click **Other Actions** and select **Reboot**. | | **Shut Down** | Go to **Devices** → **** → **Devices** → **** → **Maintenance** → **Shut Down**. | Additionally, you can also shut down the device from **Devices** → **** → **Global** → **Device Manager**. Select the required Sensor from **Sensors** tab. Click **Other Actions** and select **Shut Down**. | | **Reset CLI Password** | Go to **Devices** → **** → **Devices** → **** → **Summary**. Click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-2654326F-6ADD-40C0-B395-CF6BA9E7B539-low.jpg?sv=2026-02-06&spr=https&st=2026-11-20T03%3A35%3A22Z&se=2026-11-20T04%3A35%3A22Z&sr=c&sp=r&sig=fQ%2FSh9KHPOFbB9oZfLR31FZA63ocSDVBiNNcHmwgIuA%3D) and select **Reset CLI Password**. | Go to **Devices** → **** → **Global** → **Device Manager**. Select the **Sensors** tab. Click **Other Actions** and select **Reset CLI Password**. | | **Deploy Device Software** | Go to **Devices** → **** → **Global** → **Deploy Device Software**. | Go to **Devices** → **** → **Global** → **Device Manager**. Select the **Sensors** tab. Click **Other Actions** and select **Upgrade Device Software**. | | **Offline Upgrade Files** | Go to **Devices** → **** → **Global** → **Deploy Device Software** and click **Offline Upgrade Files**. | Go to **Devices** → **** → **Global** → **Device Manager**. Select the **Sensors** tab. Click **Other Actions** and select **Export Sync File**. | | Edit device information in **Summary** page. | For standalone Sensors, go to **Devices** → **** → **Devices** → **** → **Summary** and click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-2654326F-6ADD-40C0-B395-CF6BA9E7B539-low.jpg?sv=2026-02-06&spr=https&st=2026-11-20T03%3A35%3A22Z&se=2026-11-20T04%3A35%3A22Z&sr=c&sp=r&sig=fQ%2FSh9KHPOFbB9oZfLR31FZA63ocSDVBiNNcHmwgIuA%3D). For Sensors in a stack, go to **Devices** → **** → **Devices** → **** → **Member Sensors** → **** → **Summary** and click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-2654326F-6ADD-40C0-B395-CF6BA9E7B539-low.jpg?sv=2026-02-06&spr=https&st=2026-11-20T03%3A35%3A22Z&se=2026-11-20T04%3A35%3A22Z&sr=c&sp=r&sig=fQ%2FSh9KHPOFbB9oZfLR31FZA63ocSDVBiNNcHmwgIuA%3D). | In the **Summary** page, several monitors such as **System Health**, **Sync**, **Protections**, **Faults**, and **Device Details** are available. You can change the deployment mode configuration from **Sync** monitor. You can also edit **Shared Secret**, **Confirm Shared Secret**, **Contact Information**, **Location**, and **Comment** details. |