--- title: "Notes for upgrading the Manager from 10.1 to 11.1" slug: "notes-for-upgrading-the-manager-from-10-1-to-11-1-1" tags: ["Install and Get Started", "IPS 11.1.x"] updated: 2026-11-19T12:53:55Z published: 2026-11-19T12:53:55Z canonical: "docs.trellix.com/notes-for-upgrading-the-manager-from-10-1-to-11-1-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Notes for upgrading the Manager from 10.1 to 11.1 If you are upgrading the Manager from version 10.1 to version 11.1, read the following sections carefully. **MITRE based attack view in Trellix IPS Manager** Starting with this release of 11.1, the **Analysis** → **** → **Attack Log** page includes **Mitre Attack Details** column header which displays the adversarial **Tactic**, **Technique**, **Sub-Technique** and **Technique/Sub-Technique ID** for each alert. When looking for a specific tactic, technique, or sub-technique, you can enter any related keyword for them in the **Quick Search** field, or apply them as filter in the column level in **Attack Log**. The **Description** tab that appears on double-clicking an attack or alert now contains collapsible subsection named **Mitre Attack Details** which displays the matching **Tactic**, **Technique**, **Sub-Technique**, and **Technique/Sub-Technique ID** for the attack or alert. > [!NOTE] > Note > > **Mitre Attack Details** column in **Attack Log** is available in both Trellix IPS Manager and Central Manager. This 11.1 release also includes **MITRE ATTACK View** page in the Manager that enables you to view and analyze attacks and alerts detected by the network security appliance in the MITRE ATT&CK matrix format. It offers a unified, comprehensive view of all adversarial tactics, techniques, sub-techniques, including those that match with the attack entries in the MITRE matrix structure. It also provides you with further drill-down capabilities, such as applying filters based on the attack severity level or IP address, and delving into any specific technique/sub-technique to view only the attacks that fall under those categories. You can access this page from **Analysis** → **** → **MITRE ATTACK View**. > [!NOTE] > Note > > Mitre attack related details are not shown for older alerts. > [!NOTE] > Note > > The **MITRE ATTACK View** page is not available in Trellix IPS Central Manager. **Configure rsyslog server communication with a different port in Linux-based Manager** Starting with this release of 11.1, you can establish communication by defining the required port using `semanage`. You can define the required port for rsyslog server connection in Linux-based Manager for UDP, TCP, and TCP over SSL protocols. To establish a rsyslog connection using a required port, execute `semanage port -a -t syslogd_port_t -p <protocol> <port number>`. This command creates a new policy to allow the newly defined ports for the rsyslog service/configuration. **Scheduler Details update** Starting with this release of 11.1, **Scheduler Details** page is exposed in the Manager to view overall scheduled process. You can access this page from **Manager** → **** → **Maintenance** → **Scheduler Details**. It includes data backups, database maintenance, file maintenance, and other actions. Based on this information, you can choose an appropriate time for the backup you are currently scheduling. **Interface name update in Port Throughput Usage** Starting with this release of 11.1, the Manager provides a capability to view interface name by selecting the required interface displayed at the bottom of the chart. You can access these details from **Devices** → **** → **Devices** → **** → **Troubleshooting** → **Performance Charts**. Select **Throughput** tab. Now, select **Port Throughput Usage Mbps** from drop-down. For any selected interface, you can view the details of **Port (Interface: )**, **Port throughput rate in Mbps** and time in **MMM DD HH:MM:SS YYYY**. This release contains the following terminology updates in the Manager UI: | **Navigation Path** | **Prior to 11.1.7.3** | **11.1.7.3 and later** | | --- | --- | --- | | **Devices** → **** → **Global** → **Common Device Settings** → **NTP** | Select **Enable NTP**, configure the required NTP server(s) and click **Save**. | Select **Enable NTP** and click ![GUID-5FF7B5BA-AE98-4E18-8FEE-0795F91111DE-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-88564577-84ff-9cee-cefd-48102a6cedd6(2).jpg?sv=2026-02-06&spr=https&st=2026-11-20T08%3A08%3A12Z&se=2026-11-20T09%3A08%3A12Z&sr=c&sp=r&sig=YrPJN7zUtIJENTPWqO9k4Te63ZCgJ2Ig%2BpPBsJkCkRY%3D) to configure NTP server. After adding the details, click **Save**. | | To remove any configured NTP server, deselect the **Enable NTP** and click **Save**. > [!NOTE] > Note > > The Manager allows you to configure a maximum of two NTP servers with the same IP address format (i.e., IPv4 or IPv6). If you configure both NTP servers, **NTP Server-1** takes a higher priority. | To remove any configured NTP server, select the checkbox beside **NTP Server-** and click ![GUID-5DBFC0B8-D423-4F05-80BA-0F029C708A57-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-9c680f41-c4d7-0f5b-0dc9-583386bcbeee(2).jpg?sv=2026-02-06&spr=https&st=2026-11-20T08%3A08%3A12Z&se=2026-11-20T09%3A08%3A12Z&sr=c&sp=r&sig=YrPJN7zUtIJENTPWqO9k4Te63ZCgJ2Ig%2BpPBsJkCkRY%3D) . > [!NOTE] > Note > > The Manager allows you to configure a maximum of two NTP servers with the same IP address format (i.e., IPv4 or IPv6). If you configure both NTP servers, **NTP Server-1** takes a higher priority. | | **Devices** → **** → **Devices** → **** → **Setup** → **NTP** | Select **Enable NTP**, configure the required NTP server(s) and click **Save**. | Select **Enable NTP** and click ![GUID-5FF7B5BA-AE98-4E18-8FEE-0795F91111DE-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-88564577-84ff-9cee-cefd-48102a6cedd6(2).jpg?sv=2026-02-06&spr=https&st=2026-11-20T08%3A08%3A12Z&se=2026-11-20T09%3A08%3A12Z&sr=c&sp=r&sig=YrPJN7zUtIJENTPWqO9k4Te63ZCgJ2Ig%2BpPBsJkCkRY%3D) to configure NTP server. After adding the details, click **Save**. | | To remove any configured NTP server, deselect the **Enable NTP** and click **Save**. > [!NOTE] > Note > > The Manager allows you to configure a maximum of two NTP servers with the same IP address format (i.e., IPv4 or IPv6). If you configure both NTP servers, **NTP Server-1** takes a higher priority. | To remove any configured NTP server, select the checkbox beside **NTP Server-** and click ![GUID-5DBFC0B8-D423-4F05-80BA-0F029C708A57-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-9c680f41-c4d7-0f5b-0dc9-583386bcbeee(2).jpg?sv=2026-02-06&spr=https&st=2026-11-20T08%3A08%3A12Z&se=2026-11-20T09%3A08%3A12Z&sr=c&sp=r&sig=YrPJN7zUtIJENTPWqO9k4Te63ZCgJ2Ig%2BpPBsJkCkRY%3D) . > [!NOTE] > Note > > The Manager allows you to configure a maximum of two NTP servers with the same IP address format (i.e., IPv4 or IPv6). If you configure both NTP servers, **NTP Server-1** takes a higher priority. | | **Manager** → **** → **Integration** | To enable automatic import of **Vulnerability Assessment Report**, go to **Manager** → **** → **Integration** → **Vulnerability Assessment** → **Non-MVM Report Import**. | To enable automatic import of **Vulnerability Assessment Report**, go to **Manager** → **** → **Integration** → **Vulnerability Assessment Report Import**. | This release provides the following enhancements related to platforms, environments, or operating systems: **MLOS upgrade** Starting with this release of 11.1, the IPS Manager uses MLOS version 3.9.1 that includes additional security against new vulnerabilities. **Apache Solr upgrade** With this release the IPS Manager uses Apache Solr version 8.11.2 that includes additional security against new vulnerabilities. **Apache Tomcat upgrade** Starting with this release of 11.1, the IPS Manager uses Tomcat version 9.0.68 that includes additional security against new vulnerabilities and bug fixes. The following Manager shell command is added: | Command | Description | | --- | --- | | `semanage port -a -t syslogd_port_t -p <protocol> <port number>` | This command creates a new policy to allow the newly defined ports for the rsyslog service/configuration. | This release no longer supports the following: **Support for 9.1 and 9.2 software** Starting with this release of 11.1, support for **9.1** and **9.2** software has been deprecated. Any deployments containing these software will not be supported. > [!NOTE] > Note > > If you plan to upgrade your deployments from 9.x to 11.1, you need to first upgrade your deployments to 10.1.7.65 (for Manager) and 10.1.5.190 (for Sensor) and then upgrade to 11.1. **Integration with McAfee Vulnerability Manager** Starting with this release of 11.1, **McAfee Vulnerability Manager** integration has been removed since it reached End Of Life (EOL). **Integration with Host Intrusion Prevention** Starting with this release of 11.1, **Host Intrusion Prevention** integration has been removed since it reached EOL.