--- title: "ntp enable" slug: "ntp-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:09Z published: 2026-08-04T17:23:09Z canonical: "docs.trellix.com/ntp-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # ntp enable Enables NTP synchronization on the system. NTP is enabled by default. ### Syntax ``` [no] ntp enable ``` ### Parameters `no` The `no` form of this command disables NTP synchronization. ### Example The following example enables NTP synchronization. ``` hostname (config) # ntp enable hostname (config) # show ntp NTP is administratively enabled. NTP Authentication is administratively enabled. Clock is synchronized. Reference: 10.2.1.1. Offset: -49.888 ms. ... ``` ### Command mode Config ### Supported appliances This command was released as follows: **Malware Analysis:** Before release 6.4 **Central Management System:** Before release 6.4 **Email Security — Server:** Before release 6.4. The `NTP authentication` field was introduced in EX Series Release 7.8.0. **File Protect:** Before release 6.4 **Endpoint Security (HX):** Release 2.5 **Network Security:** Before release 6.4