--- title: "ntp peer <peer> authentication" slug: "ntp-peer-peer-authentication" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:09Z published: 2026-08-04T17:23:09Z canonical: "docs.trellix.com/ntp-peer-peer-authentication" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # ntp peer <peer> authentication Maps an NTP authentication key to an NTP peer. ### Syntax `ntp peer <peer> authentication key <number>` ### Parameters `peer` The hostname or the IPv4 or IPv6 address of the NTP peer. `number` The key ID, which is an integer from **1**-**16**. ### Example The following example maps the key with the ID of 12 to the 10.2.2.2 NTP peer. ``` hostname (config) # ntp peer 10.2.2.2 authentication key 12 hostname (config) # show ntp configured NTP enabled: yes NTP Authentication enabled: yes NTP peer 10.2.2.2  Enabled: yes  NTP version: 4  Key: 12 ... ``` ### Command mode Config ### Supported appliances This command was released as follows: **Email Security — Server:** Release 7.8.0 **Network Security:** Release 7.9 **Central Management System:** Release 7.9 **Intelligent Virtual Execution - Server:** Release 7.9