--- title: "ntp peer <peer>" slug: "ntp-peer-peer" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:09Z published: 2026-08-04T17:23:09Z canonical: "docs.trellix.com/ntp-peer-peer" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # ntp peer <peer> Adds or removes an NTP peer. ### Syntax ``` [no] ntp peer ``` ### Parameters `peer` The hostname or the IPv4 or IPv6 address of the NTP peer. `no` The `no` form of this command removes the NTP peer. ### Example The following example configures an NTP peer. ``` hostname (config) # ntp peer 10.2.2.2 ``` ### Command mode Config ### Supported appliances This command was released as follows: **Malware Analysis:** Before release 6.4 **Central Management System:** Before release 6.4 **Email Security — Server:** Before release 6.4 **File Protect:** Before release 6.4 **Endpoint Security (HX):** Release 2.5 **Network Security:** Before release 6.4