--- title: "ntp server <server> authentication" slug: "ntp-server-server-authentication" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:09Z published: 2026-08-04T17:23:09Z canonical: "docs.trellix.com/ntp-server-server-authentication" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # ntp server <server> authentication Maps an NTP authentication key to an NTP server. ### Syntax ``` ntp server authentication key ``` ### Parameters `server` The hostname or the IPv4 or IPv6 address of the NTP server. `number` The key ID, which is an integer from **1**-**16**. ### Example The following example maps the key with the ID of 8 to NTP server 0.acme.pool.ntp.org. ``` hostname (config) # ntp server 0.acme.pool.ntp.org authentication key 8 hostname (config) # show ntp configured NTP enabled: yes NTP Authentication: yes No NTP peers configured. NTP server 0.acme.pool.ntp.org  Enabled: yes  NTP version: 4  Key: 8 ... ``` ### Command mode Config ### Supported appliances This command was released as follows: **Email Security — Server:** Release 7.8.0 **Network Security:** Release 7.9 **Central Management System:** Release 7.9 **Intelligent Virtual Execution - Server:** Release 7.9