--- title: "ntp server <server> disable" slug: "ntp-server-server-disable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:09Z published: 2026-08-04T17:23:09Z canonical: "docs.trellix.com/ntp-server-server-disable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # ntp server <server> disable Disables NTP synchronization with a specific NTP server without removing its configuration settings. ### Syntax ``` [no] ntp server disable ``` ### Parameters `server` The hostname or the IPv4 or IPv6 address of the NTP server. `no` Use the `no` form of the command to re-enable NTP synchronization with the NTP server. ### Example The following example disables NTP server 172.16.3.4. ``` hostname (config) # ntp server 172.16.3.4 disable hostname (config) # show ntp configured NTP enabled: yes NTP Authentication enabled: yes No NTP peers configured. NTP server 172.16.3.4  Enabled: no  NTP version: 4  Key: none ... ``` ### Command mode Config ### Supported appliances This command was released as follows: **Malware Analysis:** Before release 6.4 **Central Management System:** Before release 6.4 **Email Security — Server:** Before release 6.4. The `NTP Authentication` and `Key` fields were introduced in EX Series Release 7.8.0. **File Protect:** Before release 6.4 **Endpoint Security (HX):** Release 2.5 **Network Security:** Before release 6.4