Trellix's NS-series network modules offer a variety of network interfaces, densities, and Trellix Intrusion Prevention System Sensor deployment options.
The 2-port QSFP28 (Quad Small Form-Factor Pluggable Plus) Network Interface Module provides 100 Gigabit ethernet performance on each port.
The 2-port QSFP+ (Quad Small Form-Factor Pluggable Plus) Network Interface Module provides 40 Gigabit ethernet performance on each port.
The 2-port SR (Short Reach) MTP (Multi-fiber Termination Push-on)/MPO (Multi-Fiber Push-on) passive fail-open interface module provides 100/40 Gigabit ethernet performance on each port.
The 4-port QSFP+ (Quad Small Form-Factor Pluggable Plus) Network Interface Module provides 40 Gigabit ethernet performance on each port.
The 4-port SM 8.5 micron with internal fail-open Network Interface Module provides 10/1 Gigabit ethernet performance on each port.
The 4-port MM 50 micron with internal fail-open Network Interface Module provides 10/1 Gigabit ethernet performance on each port.
The 4-port MM 62.5 micron with internal fail-open Network Interface Module provides 10/1 Gigabit ethernet performance on each port.
The 4-port RJ-45 with internal fail-open Network Interface Module provides 10 Gbps/1 Gbps/100 Mbps ethernet performance on each port.
The 6-port RJ‑45 with internal fail-open Network Interface Module provides 10/100/1000 Mbps ethernet performance on each port.
The 8-port SFP+/SFP (Small Form-Factor Pluggable Plus) Network Interface Module provides 10/1 Gigabit ethernet performance on each port.
Caution
The NS-series network interface modules described above are not compatible with the NS9600, NS7600, and NS3600 Sensors.
Interface modules supported by NS9600 and NS7600 Sensors
Following network interface modules are supported by NS9600 only (in G1 and G2 slots):
The 4-port SR (Short Reach) MTP (Multi-fiber Termination Push-on)/MPO (Multi-Fiber Push-on) network interface module provides 100 Gbps /40 Gbps ethernet performance on each port.
The 4-port SR (Short Reach) MTP (Multi-fiber Termination Push-on)/MPO (Multi-Fiber Push-on) with internal fail-open network interface module 100 Gbps /40 Gbps ethernet performance on each port.
The 4-port 40 Gbps LR4 (Long Reach) with internal fail-open network interface modules provides 40 Gbps ethernet performance on each port.
The 4-port 100 Gbps LR4 (Long Reach) with internal fail-open network interface modules provides 100 Gbps ethernet performance on each port.
The 4-port BiDi (bidirectional) with internal fail-open network interface module provides 100 Gbps /40 Gbps ethernet performance on each port.
Important
The 4-port 100/40 Gigabit with internal fail open interface modules (that is, 100/40 Gigabit SR MTP/MPO, 40 Gigabit LR4, 100 Gigabit LR4, and 100/40 Gigabit BiDi) are supported in NS9600 Sensors running on 11.1 Update 8 version or later.
Following network interface modules are supported by both NS9600 (in G1, G2, G3) and NS7600:
The 6-port RJ‑45 with internal fail-open Network Interface Module provides 10 Gbps /1 Gbps ethernet performance on each port.
The 8-port SM (8.5 microns) with an internal fail-open Network Interface module provides 10 Gbps /1 Gbps ethernet performance on each port.
The 8-port MM (50 or 62.5 microns) with an internal fail-open Network Interface module provides 10 Gbps /1 Gbps ethernet performance on each port.
Interface modules supported by NS3600 Sensor
Following network interface modules are supported by NS3600:
The 4-port MM (50 or 62.5 microns) with an internal fail-open Network Interface module provides 10 Gbps /1 Gbps ethernet performance on each port.
The 4-port RJ‑45 with internal fail-open Network Interface Module provides 1 Gbps/100 Mbps/10 Mbps ethernet performance on each port.