--- title: "Overview" slug: "overview-41" updated: 2026-08-25T05:10:32Z published: 2026-08-25T13:50:06Z canonical: "docs.trellix.com/overview-41" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Overview This document is a guide to the Trellix implementation of the Federal Information Processing Standards (FIPS) 140-3 and Common Criteria Network Device Protection Profile (CC-NDcPP) for certain Trellix appliances. In this document, the term *appliance* refers to the following suite of Trellix appliances; Central Management System (CMS), Email Security — Server (EX), File Protect (FX), Endpoint Security (HX) , Intelligent Virtual Execution - Server (IVX) and Network Security (NX). To view the latest software release for each appliance refer to their latest Release Notes. The term *compliance* refers to the type of compliance standard that you want your appliances to comply with, FIPS 140-3 or CC-NDcPP, or both. Within each standard are two cipher lists, compliant-security and high-security. ### Remote and direct access For instructions on remotely accessing an appliance, see the "Configuring the appliance using the Web UI” and “Configuring the appliance using the CLI” sections in the *User Guide* for your appliance. All of the functionality available through the remote command-line interface (CLI) is available through the local console. LCD configuration is disabled. ### Strong passwords A strong password is at least 15 characters long with the following complexity: - At least one uppercase letter - At least one lowercase letter - At least one number - At least one special character To configure strong passwords, see the “Configuring password validation policies” section in the *System Administration Guide* for your appliance. ### LDAP server configuration To configure an LDAP server, see the “Configuring an LDAP server” section in the *System Administration Guide* for your appliance. ### Date and time settings To set the date and time, see the “Setting date and time” section in the *System Administration Guide* for your appliance. ### Timeout settings To change the timeout and connection timeout settings, use the **fenet session timeout** command and the **fenet connection-timeout** command. Verify your changes for both types of timeout settings using the **show fenet dti configuration all** command. For details about these commands, refer to the *CLI Reference*. ### Login messages You can customize or remove the messages that appear when users log in to the appliance. You can configure three messages: - Remote Banner—Shown on the Web UI and SSH login pages. - Local Banner—Shown after the user name is entered in the CLI session. - Message of the Day—Shown after the user is authenticated and logged into the appliance CLI. Refer to the “Customizing login messages” section in the *System Administration Guide* for your appliance. :