--- title: "Packets getting dropped or network latency issues" slug: "packets-getting-dropped-or-network-latency-issues-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:51Z published: 2026-11-19T12:30:51Z canonical: "docs.trellix.com/packets-getting-dropped-or-network-latency-issues-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Packets getting dropped or network latency issues Troubleshoot the issue by performing the following steps: 1. Force the Sensor into **Bypass** mode from the web interface: 1. Log in to the web interface. 2. Go to the **Bypass** page. 3. In the **Bypass** page, set **HB active mode** to **OFF**. 4. Set **Active Bypass** to **Bypass** mode. 5. Click **Apply**. Monitor the network traffic. If the issue persists, troubleshoot the Network in your environment to resolve the issue. If the issue does not persist, go to the next step. 2. In the **Bypass** page, set **HB active mode** to **ON**. 3. Put the Sensor in layer 2 mode using the `layer2 mode assert` command from the Sensor CLI. 4. Monitor the network traffic. If the issue does not persist, issue is with the Sensor.