--- title: "Performance metrics" slug: "performance-metrics-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:31Z published: 2026-11-19T12:29:31Z canonical: "docs.trellix.com/performance-metrics-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Performance metrics ### View Throughput Usage **View Device Throughput Usage** You can view the Sensor throughput usage for the selected device. The unit used for plotting the charts is percentage. Each Sensor is rated for an official maximum throughput, and the throughput usage data displayed in the charts is a percentage of that maximum throughput. Sensors can max out above that maximum rating depending on the type of traffic. > [!NOTE] > Note > > The maximum number of records displayed for a selected device is 10,000. From the 11.1 Update 9 release, the unit used for plotting the charts is Mbps. This functionality is supported on NS3600, NS7500, NS7600, NS9500, NS9600, IPS-VM600, IPS-VM600-SSL, IPS-VM5000, and IPS-VM5000-SSL Sensors. The **Maximum**, **Average,** or **Minimum** summarized data are replaced with **Average** and **Peak** values. Additionally, the data update frequency has improved from every 3 minutes to every 30 seconds. **Device Throughput Usage**![Device Throughput Usage](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-62d489e0-b004-84ec-e18a-615d84d96627(7).png?sv=2026-02-06&spr=https&st=2026-11-20T16%3A43%3A08Z&se=2026-11-20T17%3A43%3A08Z&sr=c&sp=r&sig=iFGEd8CIwNrtsS5nbLsRGTUVNvb9lY%2FQAc3IMnVy2m8%3D) **View Port Throughput Usage** You can view the port throughput usage for a specific interface depending on the device selected. The unit used for plotting the charts is Mbps. Device throughput data is displayed by default. To view data for port throughput, select **Port Throughput Usage** from the drop-down list. To view the port throughput for a particular or multiple interfaces, select the interfaces displayed at the bottom of the charts. To hide the throughput for an interface, deselect that specific interface. For any selected interface, you can view the details of **Port (Interface: )**, **Port throughput rate in Mbps** and time in **MMM DD HH:MM:SS YYYY**. > [!NOTE] > Note > > From the 11.1 Update 9 release, you can view the **Average** and **Peak** port throughput values for NS3600, NS7500, NS7600, NS9500, NS9600, IPS-VM600, IPS-VM600-SSL, IPS-VM5000, and IPS-VM5000-SSL Sensors. **Port Throughput Usage**![Port Throughput Usage](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-c9fc4fa8-4ac7-8eae-db7f-75939c320811(7).png?sv=2026-02-06&spr=https&st=2026-11-20T16%3A43%3A08Z&se=2026-11-20T17%3A43%3A08Z&sr=c&sp=r&sig=iFGEd8CIwNrtsS5nbLsRGTUVNvb9lY%2FQAc3IMnVy2m8%3D) ### View the Memory usage You can view the memory usage which helps monitor the usage before reaching the threshold limit. The unit used for plotting the charts is percentage. The following metrics are displayed: - **Flow pool** — The percentage of memory allocated to inspect all flows. This is the default metric. - **Decrypted Flow Pool** — The percentage of memory allocated to inspect decrypted SSL flows - **Packet Buffers** — The percentage of the packet buffer used by the Sensor - **System Memory** — The percentage of the system memory used by the Sensor **Memory Usage**![Memory Usage](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-11ef342f-f241-2665-0563-53993bfa2742(7).png?sv=2026-02-06&spr=https&st=2026-11-20T16%3A43%3A08Z&se=2026-11-20T17%3A43%3A08Z&sr=c&sp=r&sig=iFGEd8CIwNrtsS5nbLsRGTUVNvb9lY%2FQAc3IMnVy2m8%3D) ### View the CPU Usage CPU usage is the usage that represents the combined usage of software processing in the datapath along with the throughput usage in the Sensor. You can view the device CPU usage which helps monitor the CPU usage before it reaches the threshold limit. The unit used for plotting the charts is in percentage. > [!NOTE] > Note > > By default, a fault message will be generated if the CPU usage goes beyond 90%. **CPU Usage**![CPU Usage](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-1adac0b4-1f38-2e20-fd15-be5393104fd9(7).png?sv=2026-02-06&spr=https&st=2026-11-20T16%3A43%3A08Z&se=2026-11-20T17%3A43%3A08Z&sr=c&sp=r&sig=iFGEd8CIwNrtsS5nbLsRGTUVNvb9lY%2FQAc3IMnVy2m8%3D) The **Actions** menu at the bottom of the page allows you to perform the following actions: - **Save as Image File (PNG)** - This allows you to save the charts as an image file in `SENSORNAME-METRIC_Performance-YYYYMMDD_hhmm.PNG` format. - **Manage Performance Metric Collection** - This opens the **Devices** → **Setup** → **Performance Monitoring** → **Summary page**. - **Manage Performance Data Storage** - This opens the **Manager** → **Maintenance** → **Database Pruning** → **File and Database Pruning page**. > [!NOTE] > Note > > This option is available only if you have access to the **Manager** menu. ### View the Packet usage You can view the number of packets transferred within a specified time frame. By default, the system displays device-level packet data. To access port-specific data, select **Port** from the available drop-down menu. You can customize your view of network packets by selecting or deselecting any of the five available size ranges: Total, 0-64, 65-127, 128-255, and 256-511. By default, all ranges are displayed. For any chosen interface, the system displays the number of packets in the format: ****, ** packets of **, and time in **MMM DD HH:MM:SS YYYY**. **Packets usage**![Packets usage](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-932c889e-3e1b-af84-85b7-f98ae423a50e(7).png?sv=2026-02-06&spr=https&st=2026-11-20T16%3A43%3A08Z&se=2026-11-20T17%3A43%3A08Z&sr=c&sp=r&sig=iFGEd8CIwNrtsS5nbLsRGTUVNvb9lY%2FQAc3IMnVy2m8%3D) > [!NOTE] > Note > > From the 11.1 Update 9 release, you can view the **Packets** tab for NS3600, NS7500, NS7600, NS9500, NS9600, IPS-VM600, IPS-VM600-SSL, IPS-VM5000, and IPS-VM5000-SSL Sensors. ### View the Inspection Time usage You can monitor the total inspection time, along with the inspection time contributed by each of the top 5 contributors. By default, the system does not display the top five contributors to this delay. To enable the visibility of these top five contributors, select the **Top 5 Contributors** checkbox. For any chosen interface, the system displays the inspection time in the format: ****, **