--- title: "Performing the Central Management HA initial configuration on Microsoft Azure" slug: "performing-the-central-management-ha-initial-configuration-on-microsoft-azure" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-10-01T10:18:22Z published: 2026-10-01T10:18:22Z canonical: "docs.trellix.com/performing-the-central-management-ha-initial-configuration-on-microsoft-azure" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Performing the Central Management HA initial configuration on Microsoft Azure The management interface is the port through which the Central Management System instance is managed and administered. It is also the port through which integration of the Central Management System instance and managed appliances is managed, and is the port through which the connection between the two Central Management System HA nodes is managed. ### Important Make sure the DHCP lease is persistent to maintain the connection between the nodes and the managed appliances. Initial settings need to be configured to set up the management interface and to allow access to the network, change the default admin password, enable HA mode, and so on. ### Important This procedure must be performed on both Central Management System virtual appliances (nodes). After you complete the jump-start wizard on the primary node, the CM HA engine configuration and CM HA engine start. As the wizard instructs, you must run the` show ha status `command and wait for the engine to start before performing the initial configuration on the secondary node. To perform the initial configuration: | Step | Response | | --- | --- | | Enter activation code? | Enter the activation code for the appliance. | | Hostname? | Enter the hostname for the appliance. | | Admin password? | (Optional) Enter a new administrator password. | | Confirm admin password? | Re-enter the new administrator password. | | Enable remote access for 'admin' user? | Enter **yes** to enable the administrator to log in to the appliance remotely. | | Use DHCP on ether1 interface? | Enter **yes** to use Dynamic Host Configuration Protocol (DHCP) to configure the appliance IP address and other network parameters. | | Enable fenet service? | Enter **yes** to enable access to the DTI network. (If you enter **no**, the next three steps are skipped.) | | Enable fenet license update service? | Enter **yes** to enable the licensing service to automatically download your licenses from the DTI network and install them. (If licenses are downloaded and installed successfully, the wizard skips the step that prompts for the product license key and the step that prompts for the security-content updates key.) | | Sync appliance time with fenet? | Enter **yes** to synchronize the appliance time with the DTI server time. If you enabled the licensing service, synchronization prevents a feature from being temporarily unlicensed due to a time gap. The wizard makes three attempts to perform this step before it gives up and moves to the next step. | | Update licenses from fenet? | Enter **yes** to download and install your licenses. The wizard makes three attempts to perform this step before it gives up and moves to the next step. | | Enable NTP? | Enter **yes** to enable automatic time synchronization with one or more Network Time Protocol (NTP) servers. Enter **no** to manually set the time and date on the appliance. (This step is skipped if you entered **yes** in the "Sync appliance time with fenet?" step.) If you enter **no**, specify the time and date in subsequent steps. | | Enable FaaS VPN? | Enter **no**. | | Set time (::)? | Enter the appliance time in Greenwich Mean Time (GMT) (UTC+0). (This step and the next step are skipped if you entered **yes** in the "Sync appliance time with fenet?" or "Enable NTP?" step. | | Set date (//
)? | Enter the appliance date in Greenwich Mean Time (GMT) (UTC+0). | | Enable IPv6? | Enter **no**. | | Configure CM HA? | Enter **yes**. | | Product license key? | Enter the product license key you obtained from Trellix, or press Enter to install a 15-day evaluation license. (This step and the next step are skipped if you entered **yes** in the "Enable fenet license update service?" step and if licenses were successfully installed as a result.) | | CM HA uses ether1 as CM HA default interface. Do you want to change CM HA interfaces? | Enter **no**. | | Configure this node as primary Central Management HA node? | Enter **yes** for the primary node. Enter **no** for the secondary node. | | **Secondary node only**: CM HA primary node IP address? | Enter the "dummy" static IP address you assigned in [Assigning a "Dummy" Static IP Address on page 1](/network-and-platform/docs/assigning-a-dummy-static-ip-address). | | **Secondary node only**: CM HA primary node admin account password? | Enter the password for the primary node's remote admin user. | | **Secondary node only**: Confirm CM HA primary node admin account password? | Re-enter the password for the primary node's remote admin user. | 1. Restart the configuration jump-start wizard: ```plaintext hostname (config) # configuration jump-start                   ``` 2. Answer the steps as described in the following table. 3. Check the status until the HA engine starts: ```plaintext hostname (config) # show ha status                   ``` 4. Repeat this procedure on the secondary node. 5. See the *Central Management System High Availability Guide* for information about cluster monitoring, administration, and troubleshooting. :