--- title: "Performing the initial IVX configuration" slug: "performing-the-initial-ivx-configuration" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-09T22:45:38Z published: 2026-09-09T22:45:38Z canonical: "docs.trellix.com/performing-the-initial-ivx-configuration" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Performing the initial IVX configuration The management interface is the port through which the virtual appliance is managed and administered. It is also the port through which integration of the Central Management System appliance and a managed appliance is managed. With the single-port address type, the management interface is also the port through which a managed appliance requests and downloads software updates from the DTI network. Initial settings need to be configured to set up the management interface, and to allow access to the network, change the default administrator password, and so on. ### Using the Console Trellix recommends that you accept the evaluation licenses during the initial configuration, because typing the keys is tedious and prone to error. After the activation code is entered and the admin user has access to the appliance Web UI or CLI , you can copy and paste the license keys. To perform the initial configuration of a virtual appliance: 1. Log in to **ESXi Host client**. 2. In the left pane, expand **Virtual Machines** and then select the virtual appliance. 3. Click the **Console** tab on the top left of the window. ![ESXiHostClient_iniConfig.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-9d1616a5-7651-2aad-5f1a-1235c7f8b38e.png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A04%3A23Z&se=2026-11-20T11%3A04%3A23Z&sr=c&sp=r&sig=NAjxSp0rVF4ckVcL5joK%2B%2FEhXq%2BOkESZQsy5r%2B4ykM0%3D) 4. At the login prompt, enter **admin**. ![IVX_Activation1.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-b2bfc7d9-2833-8b78-6096-970fa6ad73a7.png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A04%3A23Z&se=2026-11-20T11%3A04%3A23Z&sr=c&sp=r&sig=NAjxSp0rVF4ckVcL5joK%2B%2FEhXq%2BOkESZQsy5r%2B4ykM0%3D) 5. At the password prompt, enter **admin**. 6. If prompted to change the password, configure a new password using the` username admin password <new password> `command. You will be logged out. Log in again with the new password. ![IVX_Activation2.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-d4fa003b-1d29-7caf-9b21-e3995779794d.png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A04%3A23Z&se=2026-11-20T11%3A04%3A23Z&sr=c&sp=r&sig=NAjxSp0rVF4ckVcL5joK%2B%2FEhXq%2BOkESZQsy5r%2B4ykM0%3D) 7. On logging in again, select **Yes** to accept License Agreement. 8. Select **Yes** if prompted to use the wizard for initial configuration. 9. If you do not receive the above prompt, start the configuration jump-start wizard: ``` hostname (config) # configuration jump-start                     ``` 10. Answer the wizard questions as described in Wizard steps. ### Wizard Steps The following tables describe the questions the configuration wizard prompts you to answer. As noted in the table, the wizard skips some steps based on your answers to previous steps. ### Note Press Ctrl+C to exit the configuration wizard. After the management interface is configured, an administrator can use the` configuration jump-start `CLI command to run the wizard again. ###### Intelligent Virtual Execution steps | Step | Response | | --- | --- | | Hostname? | Enter the hostname for the appliance. | | Admin password? | (Optional) Enter a new administrator password. | | Confirm admin password? | Re-enter the new administrator password. | | Enable remote access for 'admin' user? | Enter **yes** to enable the administrator to log in to the appliance remotely. Enter **no** to disable remote access. | | Enable IPv4 for the management interface (ether1) | Enter **yes** to enable the IPv4 protocol. If you enter **no**, IPv4 setup is skipped and you are redirected to the IPv6 configuration, where you can enable or configure IPv6 instead. | | Use DHCP on ether1 interface? | Enter **no** to manually configure your IP address and network settings. | | Use zeroconf on ether1 interface? | Enter **yes** to use zero-configuration (zeroconf) networking. Enter **no** to specify a static IP address and network mask. (If you specify **yes**, the next step is skipped.) **NOTE**: Do not use zeroconf on the primary interface. | | Primary IPv4 address and masklen? | Enter the IPv4 address for the management interface in A.B.C.D format and enter the network mask (for example, **1.1.1.2 /24**). | | Default gateway? | Enter the gateway IP address for the management interface. | | Enable IPv6 on management interface (ether 1)? | Enter **yes** to enable IPv6 protocol, which changes network IP routing from IPv4 to IPv6. | | Enable IPv6 autoconfig (SLAAC) on ether1 interface? | Enter **yes** to enable IPv6 autoconfig on the ether1 (management interface) port. (This step is skipped if you entered **no** in the "Enable IPv6" step.) | | Enable DHCPv6 on ether1 interface? | Enter **yes** to use DHCPv6 to configure IPv6 hosts with IP addresses. (This step is skipped if you entered **no** in the "Use DHCP on ether1 interface" or "Enable IPv6" step.) | | Primary IPv6 address and masklen (connection may be lost upon change)? | Enter the IPv6 address for the management interface in standard IPv6 format and enter the network mask. Example: **2607:8d40:a2:162:ae1f:6bff:fe66:6152/64** | | IPv6 Default gateway | Enter the gateway IPv6 address for the management interface. | | IPv6 Primary DNS server | Enter the IPv6 address in X:X:X:X:X:X:X:X format. Example: 2001:db8::1. | | Domain name? | Enter the domain for the management interface (for example, **it.acme.com**). | | Enable fenet service? | Enter **yes** to enable access to the DTI network. | | Enable fenet license update service? | Enter **yes** to enable the licensing service to automatically download your licenses from the DTI network and install them. (If licenses are downloaded and installed successfully, the wizard skips the step that prompts for the product license key and the step that prompts for the security-content updates key.) | | Sync appliance time with fenet? | Enter **yes** to synchronize the appliance time with the DTI server time. If you enabled the licensing service, synchronization prevents a feature from being temporarily unlicensed due to a time gap. The wizard makes three attempts to perform this step before it gives up and moves to the next step. | | Update licenses from fenet? | Enter **yes** to download and install your licenses. The wizard makes three attempts to perform this step before it gives up and moves to the next step. | | Enable NTP? | Enter **yes** to enable automatic time synchronization with one or more Network Time Protocol (NTP) servers. | | Product license key? | Enter the product license key you obtained from Trellix, or press Enter to install a 15-day evaluation license. (This step and the next step are skipped if you entered **yes** in the "Enable fenet license update service?" step and if licenses were successfully installed as a result.) | | Security-content updates key? | Enter the security-content license key you obtained from Trellix, or press Enter to skip this step and install the license later. | | Submission: Interface? | Enter the name of the interface. (You can skip this step and assign the submission interface after initial configuration also. If you do not assign a submission interface, ether1 is used as the submission interface by default. If you choose to keep it unchanged, the next two steps will be automatically skipped). ### Note **For IPv6-only configuration**: If you are setting up an IPv6-only appliance, you must leave this setting as the default (as "ether1") during the configuration. To change the interface, for example, from ether1 to ether2 in an IPv6 only environment, you can configure a different submission interface after the initial setup is complete using interface command. To change the Submission interface from ether 1 to ether2 or other interface, you can use **interface ipv6** command to set the IPv6 address and then use **mvx node config** command (**mvx node config submission-if**) to set the Submission interface. | | Submission: IP address and masklen? | Enter the IP address for the submission interface in A.B.C.D format and enter the network mask (for example, **10.1.1.1 /24**). | | Submission: Default IPv4 gateway? | Enter the gateway IP address for the submission interface. | | Cluster: Interface? | Enter the name of the interface. (You can skip this step and assign the cluster interface after initial configuration also. If you do not assign a cluster interface, ether1 is used as the cluster interface by default. If you choose to keep it unchanged, the next step will be automatically skipped). ### Note **For IPv6-only configuration**: If you are setting up an IPv6-only appliance, you must leave this setting as the default (as "ether1") during the configuration. To change the interface, for example, from ether1 to ether2 in an IPv6 only environment, you can configure a different cluster interface after the initial setup is complete using interface command. To change the Cluster interface from ether 1 to ether2 or other interface, you can use **interface ipv6** command to set the IPv6 address and then use **mvx node config** command (**mvx node config cluster-if**) to set the Cluster interface. | | Cluster: IP address and masklen? | Enter the IP address for the submission interface in A.B.C.D format and enter the network mask (for example, **10.1.1.1 /24**). | | Send a request to be managed by CMS? | Enter **yes** if appliance needs to be managed by a Central Management System appliance else enter **no**. | :