--- title: "Performing the initial NDR Console configuration" slug: "performing-the-initial-ndr-console-configuration-2" tags: ["Install and Get Started", "NDRC 4.x", "Customer", "Network Security", "NDR 4.x"] updated: 2026-09-09T18:08:56Z published: 2026-09-09T18:08:56Z canonical: "docs.trellix.com/performing-the-initial-ndr-console-configuration-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Performing the initial NDR Console configuration Before you deploy your virtual NDR Console appliance, make sure the following requirements are met. ### Wizard steps The following table describes the questions the configuration wizard prompts you to answer. > [!NOTE] > Note > > This topic uses example values in bold for illustration. | Prompt | Action | | --- | --- | | `This is the first boot of your new IA`. `You must accept the FireEye End User License Agreement before you can continue.` `Press <return> to display EULA.` | 1. Press the Enter key. 2. Read the EULA at http://www.fireeye.com/company/legal. 3. Press Q to leave this screen and proceed to the next screen. | | `Type "accept" to accept the agreement.` `Type "eula" to review the EULA again. Type "no" if you do not accept the agreement.` `*Typing "no" will cause the system to halt.` `Do you accept the FireEye End User License Agreement?: accept` | Type one of the options the prompt presents. | | `Configuring IA time preferences:` | | `The current time zone is set to "UTC (UTC, +0000)"` `Would you like to change the time zone? [y/N]: N` | Enter **y** to change the time zone from UTC or **N** to keep the UTC time zone. | | `The current time is Mon Jul 25 17:08:17 UTC 2019` `Would you like to change the time? [y/N]: N` | Enter **y** to change the displayed current time or **N** to keep the current time. | | `Configuring IA network:` `Pressing return without entering a new value will use the default values.` | | `Hostname [ IA ]: IA -16` | Specify the host name. | | `Fully qualified hostname []:` | (Optional): Specify the fully qualified domain name (FQDN). | | `Configure network devices. DHCP or static devices with an IP address or Netmask will not be available for capture.` | | `Configure ether1 interface?` 1. `static` 2. `dhcp` 3. `disbaled` `[1/2/3]: 1` | Enter 1 or 2 to configure the first interface (for the management port, indicated by MGMT). > [!NOTE] > Note > > Do not disable this interface. | | `Routable IP address (dotted quad)` `[10.0.0.1]: 10.128.44.82` | If you entered **1** at the previous prompt, enter an accessible IPv4 address in the specified format. | | `IPv4 netmask (dotted quad)` `[255.255.255.0]: 255.255.255.0` | Enter the netmask for the IP address in the specified format. | | `Routable IPv6 address []:` `IPv6 prefix length []:` | Press Enter twice to skip this configuration. | | `Configure ether2 interface?` 1. static 2. dhcp 3. disabled `[1/2/3]: 3` | Enter **3** to disable the second interface (for the capture port). | | `Please select an available capture device- you may select up to 4 more (enter q if done selecting).` 1. `ether1 (has IP/NM)` 2. `ether2 (Available)` `[2]: 2` | Configure the capture interface. If multiple interfaces are available, choose one contiguous to the management interface. | | `Please select an available capture device - you may select up to 4 more (enter q if done selecting).` 1. `ether1 (has IP/NM)` 2. `ether2 (Available)` `[2]: 2` | Configure the capture interface. If multiple interfaces are available, choose one contiguous to the management interface. | | `IPv6 Gateway []:` | Press Enter to skip this configuration. | | `Enter each DNS server on a separate line.` `Blank line to exit` `DNS server: 10.128.11.100` `DNS Server:` | Enter each DNS server on a separate line. Press Enter when you are finished to proceed to the next prompt. | | `Enter each Search domain on a separate line. Blank line to exit` `Search domain: it.acme.com` `Search domain:` | Enter each search domain on a separate line. Press Enter to proceed to the next prompt. | | `Enter each NTP server on a separate line.` `Blank line to exit.` `NTP server: 0.pool.ntp.org` `NTP server:` | Enter each NTP server on a separate line. Press Enter to proceed to the next prompt. | | `HOSTNAME: IA -16` `FQDN:` `ether1: enabled, static` `IPv4: 10.128.44.82` `netmask: 255.255.255.0` `IPv6: prefix length:` `ether2: disabled` `Capture Device: ["ether2"]` `GW: 10.128.44.1` `GW6:` `DNS: 10.128.11.100` `Search Domains: it.acme.com` `NTP: 0.pool.ntp.org` `SAN_ENABLED: false` `Accept values as shown? [y/N]: y` | Review the information and then enter **y** to accept the values or **N** to return to the wizard and change them. | | `Configured data storage found - rebuild required` `Do you want to encrypt storage? [y/N]:` | Enter **y**. | | `Would you like to change the npadmin, npscp, and c IA account password? [y/N]:` | Enter **y** to be prompted to change the password or **N** to accept the default password of "hammerhead" for these three accounts and change them later. | | `Rebooting to apply the new settings.` ... | Wait for the instance to finish rebooting. |