--- title: "ping" slug: "ping-6" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:18Z published: 2026-08-04T17:23:18Z canonical: "docs.trellix.com/ping-6" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # ping Sends Internet Control Message Protocol (ICMP) echo request packets to a specified hostname or IP address to verify that the destination is reachable over the network. ### Syntax `ping [-aAbBdDfhLnOqrRUvV] [-c <count>] [-i <interval>] [-I <interface>] [-m <mark>] [-M <pmtudisc_option>] [-l <preload>] [-p <pattern>] [-Q <tos>] [-s <packetsize>] [-S <sndbuf>] [-t <ttl>] [-T <timestamp_option>] [-w <deadline>] [-W <timeout>] [hop1 ...] <destination>` ### Parameters `-a` Issues an audible ping. `-A` Adjusts the packet interval so only one unanswered probe is sent (adaptive ping). `-b` Allows pinging of a broadcast address. `-c count` Number of pings to send. By default, pings are sent continuously until you press Ctrl+C. `-d` Sets the socket debug option. `-f` Sets the interval between pings to zero (flood option) if the -i option is not used. Displays a period for each echo request, and a backspace for each reply, to indicate how many packets are being dropped. `-i interval` Number of seconds between pings (default is 1, or 0 if the -f option is used). `-I interface` IP address or interface name used as the source address of the packets. Required to ping IPv6 link-local address. `-L` Suppresses the loopback of multicast packets. Applies only if the ping destination is a multicast address. `-Mhint` Specifies the path MTU discovery option: - do—Sets the do-not-fragment (DF) flag. - want—Sets the DF flag, but allows local fragmenting of large packets. - dont—Disables the DF flag (default). `-n` Numeric address output only (no lookup for hostnames). `-p pattern` Specifies the data used to fill each ping packet (up to 16 bytes). For example, -p ff fills the packet with 1s. Used to diagnose data-related network problems. `-q` Displays only a summary line at startup and completion (quiet mode). `-Q tos` Type of Service value of the ping packets (0 to 255), such as an IP precedence value (0 to 7) or DSCP value (0 to 63). Default is 0. `-r` Pings a local host connected directly to the specified interface (-I option required). `-R` Records and displays up to nine hops in the packet route (IPv4 only). Many hosts ignore this option. `-s packetsize` Number of data bytes per packet (default is 5). `-S sndbuf` Number of packets allowed in the send buffer (default is 1). `-t ttl` Number of routers the packets can traverse before being discarded. `-T option` Specifies the time stamp option used to calculate roundtrip times: - tsonly—Sets just the time stamp (default). - tsandaddr—Sets the time stamp and addresses. - tsprespec host1 [host2] [host3] [host4]—Sets the time stamp and specific router addresses. `-U` Displays user-to-user latency, rather than network roundtrip time. `-v` Verbose output. `-V` Displays ping version and exits. `-w deadline` Maximum number of seconds before ping exits. `hop1 hop2...` IP address of each router in the path used to route the pings, specified in sequence (multiple addresses must be separated by spaces). `destination` Destination IP address or hostname. ### Example The following example sends three echo requests to the specified address. ``` hostname > ping -c 3 10.3.6.17 PING 10.3.6.17 (10.3.6.17) 56(84) bytes of data. 64 bytes from 10.3.6.17: icmp_seq=1 ttl=123 time=1.87 ms 64 bytes from 10.3.6.17: icmp_seq=2 ttl=123 time=1.78 ms 64 bytes from 10.3.6.17: icmp_seq=3 ttl=123 time=1.79 ms --- 10.3.6.17 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2003ms rtt min/avg/max/mdev = 1.782/1.815/1.871/0.039 ms ``` ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before release 6.4. - **Central Management System:** Before release 6.4 - **File Protect:** Before release 6.4 - **File Protect:** Before release 6.4. - **Network Security:** Before release 6.4. - **Endpoint Security (HX):** Release 2.5 - **Intelligent Virtual Execution - Server:** Before release 6.4