--- title: "ping" slug: "ping-8" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:52Z published: 2026-11-19T12:29:52Z canonical: "docs.trellix.com/ping-8" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # ping This command enables you to ping a network host. You can specify either the IPv4 or IPv6 address here. This command pings the Sensor and returns a response with the following values: | Value | Description | | --- | --- | | icmp_seq | Number of times the Sensor is pinged | | ttl | Number of hops between the source and destination | | time taken | The average time taken by the Sensor to respond to the ping | | packets transmitted | Number of packets transmitted during the ping | | packets received | Number of packets received during the ping | | packet loss | Number of packets lost during the execution of the command | | rtt min/avg/max | Minimum, average and maximum time taken for a round trip in a ping cycle | **Syntax:** `ping <A.B.C.D><A:B:C:D:E:F:G:H> -c <1-100>` | Parameter | Description | | --- | --- | | | Denotes the 32-bit IP address written as four eight-bit numbers separated by periods. Each number (A,B,C or D) is an eight-bit number between 0-255. | | | Denotes the 128-bit address written as octet (eight groups) of four hexadecimal numbers, separated by colons. Each group (A,B,C,D, etc.) represents a group of hexadecimal numbers between 0000-FFFF. | | -c <1-100> | Denotes the number of times to ping the Sensor. This is optional and can be used if the Sensor needs to be pinged multiple times. | **Sample Output:** - For Sensor, the output is as shown below: `intruShell@fc_4050> ping 172.16.100.100` `PING 172.16.100.100 with 32[60] bytes of data` `40 bytes from host 172.16.100.100: icmp_seq=1 ttl=64 time taken 0.30 msec` `--- 172.16.100.100 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0.30ms` `rtt min/avg/max = 0.30/0.30/0.30 msec` - For Sensor, when it is pinged multiple times, the output is as shown below: `intruShell@fc_4050> ping 172.16.100.100 -c 3` `PING 172.16.100.100 with 32[60] bytes of data` `40 bytes from host 172.16.100.100: icmp_seq=1 ttl=64 time taken 0.41 msec` `40 bytes from host 172.16.100.100: icmp_seq=2 ttl=64 time taken 0.20 msec` `40 bytes from host 172.16.100.100: icmp_seq=3 ttl=64 time taken 0.19 msec` `--- 172.16.100.100 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 0.80ms` `rtt min/avg/max = 0.19/0.26/0.41 msec` **Example:** The following command pings a 128 bit address written as an octet of four hexadecimal numbers. `ping 2001:0db8:8a2e:0000:0000:0000:0000:0111` **Applicable to:** NS-series Sensors