pktcapture mgmt

Prev Next

This command filters and captures packets of the management port. This command is used to debug various integration or connectivity issues on the Management port.

Syntax:

pktcapture mgmt <filter>

Parameter Description
filter BPF (Berkeley Packet Filter) for capturing packets. If no filter is provided, all packets are captured.

Note

If you do not want to provide a filter, use an empty string ("") as the parameter value.

Note

For high throughput devices, when capturing from the Manager, ensure filters are provided such that not more than 2 Gbps of traffic is captured.

Sample Output:

intruShell@NS7350> pktcapture mgmt "port 22"

A packet capture file will be sent to the Manager, as per the configuration.

Do you want to proceed with the packet capture session?

Tip: Press "ctrl+k" to terminate a packet capture session.

Please enter Y to confirm: Y

09:42:57.698177 IP 10.20.24.24.5137 > 10.1.1.8.22: Flags [S], seq 2072890780, win 64960, options [mss 1160,nop,wscale 8,nop,nop,sackOK], length 0

09:42:57.698232 IP 10.213.171.81.22 > 10.20.24.24.5137: Flags [S.], seq 2938926341, ack 2072890781, win 29200, options [mss 1460], length 0

09:42:57.725049 IP 10.20.24.24.5137 > 10.1.1.8.22: Flags [.], ack 1, win 64960, length 0

Applicable to:

NS9500 (standalone and stack), NS9x00, NS7500, NS7x50, NS7x00, NS5x00, NS3500, NS3x00 series, and Virtual IPS Sensors.