pktcapturefile

This command uploads the packet capture file to a SCP server or deletes a packet capture file from the Sensor. The action to upload or delete is passed as a parameter to this command.

Note
Before running the command, you should configure a valid SCP server. You can configure a SCP server by using set scpserver ip command. For example:
set scpserver ip 192.168.1.1
For more information, see set scpserver ip.

Syntax:

pktcapturefile <upload/discard>

Parameter	Description
upload	Uploads a packet capture file to the SCP server. By default, the captured packets are saved in the `/tftpboot/capture.pcap` file on the Sensor. This command uploads the `capture.pcap` file to the SCP server and deletes the file from the `/tftpboot` directory after the upload.
discard	Deletes the `/tftpboot/capture.pcap` packet capture file in the Sensor.

Sample Output:

IntruDbg#> pktcapturefile upload

uploading capture file to scp server 192.168.1.15...

Please enter the SCP User Name : root

Transfer Successful

Applicable to:

NS9600 (standalone and stack), NS9500 (standalone and stack), NS9x00, NS7600, NS7500, NS7x50, NS7x00, NS5x00, NS3600, NS3500, NS3x00 series, and Virtual IPS Sensors.