--- title: "pktcapturefile" slug: "pktcapturefile" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:56Z published: 2026-10-05T15:40:56Z canonical: "docs.trellix.com/pktcapturefile" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # pktcapturefile This command uploads the packet capture file to a SCP server or deletes a packet capture file from the Sensor. The action to upload or delete is passed as a parameter to this command. > [!NOTE] > Note > > Before running the command, you should configure a valid SCP server. You can configure a SCP server by using set scpserver ip command. For example: > > ``` > set scpserver ip 192.168.1.1 > ``` > > For more information, see [set scpserver ip](/network-and-platform/docs/set-scpserver-ip). **Syntax:** pktcapturefile <upload/discard> | Parameter | Description | | --- | --- | | upload | Uploads a packet capture file to the SCP server. By default, the captured packets are saved in the /tftpboot/capture.pcap file on the Sensor. This command uploads the capture.pcap file to the SCP server and deletes the file from the /tftpboot directory after the upload. | | discard | Deletes the /tftpboot/capture.pcap packet capture file in the Sensor. | **Sample Output:** IntruDbg#> pktcapturefile upload uploading capture file to scp server 192.168.1.15... Please enter the SCP User Name : root Transfer Successful **Applicable to:** NS9500 (standalone and stack), NS9x00, NS7500, NS7x50, NS7x00, NS5x00, NS3500, NS3x00 series, and Virtual IPS Sensors.