--- title: "policymgr allowlist gre enable" slug: "policymgr-allowlist-gre-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:18Z published: 2026-08-04T17:23:18Z canonical: "docs.trellix.com/policymgr-allowlist-gre-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # policymgr allowlist gre enable Enables or disables a Generic Routing Encapsulation (GRE) traffic allowlist. GRE is a tunneling protocol that can be used to encapsulate network layer packets to transport other protocols over an IP network. GRE establishes a private point-to-to connection. Packets are analyzed and compared against a known GRE allowist to determine whether they are GRE packets. A GRE traffic allowlist allows the Network Security appliance to allowlist all GRE packets. > [!NOTE] > Note > > When GRE traffic is enabled on the Network Security appliance, all GRE packets are allowlisted. When GRE traffic is disabled on the Network Security appliance, GRE packets are not allowlisted. > [!WARNING] > Important > > A GRE traffic allowlist is disabled by default. ### Syntax `[no] policymgr whitelist gre enable` ### Parameters `no` Use the `no` form of the command to disable the GRE traffic allowlist. ### Example The following example enables the GRE traffic allowlist on the Network Security appliance. ``` hostname (config) # policymgr whitelist gre enable ``` The following example disables the GRE traffic allowlist on the Network Security appliance. ``` hostname (config) # no policymgr whitelist gre enable ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.0