--- title: "policymgr allowlist port <port_number>" slug: "policymgr-allowlist-port-port-number" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:18Z published: 2026-08-04T17:23:18Z canonical: "docs.trellix.com/policymgr-allowlist-port-port-number" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # policymgr allowlist port <port_number> Adds a port to a allowlist. You must enter each port separately. You can add up to 256 port allowlist entries. > [!WARNING] > Important > > After you add or remove a port on a whitelist, use the `policymgr refresh-policy` command in the CLI configuration mode to refresh the policy configuration. > [!WARNING] > Important > > Use the `policymgr whitelist port enable` command to enable the port whitelist after you have added the ports to the whitelist. ### Syntax `[no] policymgr whitelist port <port_number>` ### Parameters `no` Use the `no` form of this command to remove a port from an allowlist on the Network Security appliance. You must remove each port separately. `<port_number>` Adds a port number to the port allowlist. ### Example The following example adds a port to a allowlist on the Network Security appliance. `hostname (config) # policymgr whitelist port 443` The following example removes a port from a allowlist on the Network Security appliance. `hostname (config) # no policymgr whitelist port 443` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.0