--- title: "policymgr interface <interfacePair> mirror port" slug: "policymgr-interface-interfacepair-mirror-port" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:18Z published: 2026-08-04T17:23:18Z canonical: "docs.trellix.com/policymgr-interface-interfacepair-mirror-port" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # policymgr interface <interfacePair> mirror port Allows the Network Security appliance to mirror the traffic that has been seen on the appliance to a third-party device through a TAP or SPAN port. You can also enable port mirroring for all traffic types (including SSL encrypted traffic) on the monitoring interface by using the [policymgr interface mirror enable](/network-and-platform/docs/policymgr-interface-interfacepair-mirror-enable) . For details about how to enable port mirroring for all traffic types, see the "Configuring Threat Management" chapter of the *Network Security User Guide.* > [!NOTE] > Note > > If the appliance is deployed in inline block mode, blocked traffic is also forwarded. For more information, see the Network Security System Administration Guide. ### Syntax ``` policymgr interface mirror port ``` ### Parameters `<interfacePair>` The interface pair from which traffic will be forwarded. `<portName>` The port that will receive the mirrored traffic, such as pether5 or pether6. ### Examples The following example configures pether6 as the mirror port for the monitoring traffic on Interface A, and displays the results. ``` hostname (config) # policymgr interface A mirror port pether6 hostname (config) # show policymgr interfaces Policy enabled: yes Interface A  Active      : yes  op mode     : block (enforcing)  fail-safe   : close  policy      : mixed  tolerance   : 1  Ports       : pether3  pether4  QinQ        : no  QinQ-evet   : 0x88a8  Mirror:    Non-SSL   : no    SSL       : no    Port     : pether6 ......... ``` The following example configures pether6 as the mirror port for Interface A and pether9 as the mirror port for Interface C. ``` hostname (config) # policymgr interface A mirror port pether6 hostname (config) # policymgr interface C mirror port pether9 ``` The following example configures pether6 as the mirror port for both Interface A and Interface D. ``` hostname (config) # policymgr interface A mirror port pether6 hostname (config) # policymgr interface D mirror port pether6 ``` The following example configures pether10 as the mirror port for Interface D, which is in tap mode. ``` hostname (config) # policymgr interface D mirror port pether10 ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances **Network Security:** Release 7.7