--- title: "policymgr interface <port-pair-name> drop tcp reset client enable" slug: "policymgr-interface-port-pair-name-drop-tcp-reset-client-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:18Z published: 2026-08-04T17:23:18Z canonical: "docs.trellix.com/policymgr-interface-port-pair-name-drop-tcp-reset-client-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # policymgr interface <port-pair-name> drop tcp reset client enable Enables sending a TCP reset message to the client on the appliance interface. > [!WARNING] > Important > > You must use the `policymgr interface <port-pair-name> re-configure` command for the changes to take effect. ### Syntax `[no] policymgr interface <port-pair-name> drop tcp reset client enable` ### Parameters `no` Use the `no` form of this command to disable sending a TCP reset message to the client on the appliance interface. `<port-pair-name>` Designation (A or B) that is configured on the appliance interface. ### Example The following example enables sending a TCP reset message to the client on the specified interface. ``` hostname  (config) # policymgr interface A drop tcp reset client enable hostname(config) # policymgr interface A re-configure ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Before Release 7.5