--- title: "policymgr interface <port-pair-name> op-mode bypass" slug: "policymgr-interface-port-pair-name-op-mode-bypass" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:18Z published: 2026-08-04T17:23:18Z canonical: "docs.trellix.com/policymgr-interface-port-pair-name-op-mode-bypass" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # policymgr interface <port-pair-name> op-mode bypass Allows all traffic to pass through unmonitored on the Network Security appliance. This command is not supported on SmartVision Edition appliances, which are Network Security appliances with SmartVision Edition appliance licenses. The SmartVision Edition sensor is also called Trellix Network Security, SmartVision Edition. > [!WARNING] > Important > > You must use the `policymgr interface <port-pair-name> re-configure` command for the changes to take effect. ### Syntax `policymgr interface <port-pair-name> op-mode bypass` ### Parameters Designation (A or B) that is configured on the appliance interface. ### Example The following example configures all traffic to pass through on the specified interface. ``` hostname (config) # policymgr interface A op-mode bypass hostname (config) # policymgr interface A re-configure ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Before Release 7.5