--- title: "policymgr interface <port-pair-name> op-mode monitor" slug: "policymgr-interface-port-pair-name-op-mode-monitor" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:18Z published: 2026-08-04T17:23:18Z canonical: "docs.trellix.com/policymgr-interface-port-pair-name-op-mode-monitor" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # policymgr interface <port-pair-name> op-mode monitor Configures inline monitoring to monitor all packets without blocking any and to generate alerts about potential infections. This command is not supported on SmartVision Edition appliances, which are Network Security appliances with SmartVision Edition appliance licenses. The SmartVision Edition sensor is also called Trellix Network Security, SmartVision Edition. > [!WARNING] > Important > > You must use the `policymgr interface <port-pair-name> re-configure` command for the changes to take effect. ### Syntax `policymgr interface <port-pair-name> op-mode monitor` ### Parameters `<port-pair-name>` Designation (A or B) that is configured on the appliance interface. ### Example The following example configures inline monitoring on the specified interface. ``` hostname (config) # policymgr interface A op-mode monitor ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Before Release 7.5