--- title: "policymgr interface <port-pair-name> ssl-intercept enable" slug: "policymgr-interface-port-pair-name-ssl-intercept-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:18Z published: 2026-08-04T17:23:18Z canonical: "docs.trellix.com/policymgr-interface-port-pair-name-ssl-intercept-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # policymgr interface <port-pair-name> ssl-intercept enable Enables or disables SSL interception on a network port pair. > [!NOTE] > Note > > When you enable SSL interception on a network port pair, the appliance will analyze the encrypted parts of HTTPS traffic. When you disable SSL interception on a network port pair, the appliance will not analyze the encrypted parts of HTTPS traffic. > [!WARNING] > Important > > SSL interception is disabled by default. For details about how to enable or disable SSL interception, see the "Configuring SSL Interception" chapter of the Network Security User Guide. ### Syntax `[no] policymgr interface <port-pair-name> ssl-intercept enable` ### Parameters ``` no ``` Use the no form of this command to disable SSL interception on a network port pair. ``` ``` Designation that is configured on the appliance interface. ### Example The following example enables SSL interception on a network port pair: ``` hostname (config) # policymgr interface A ssl-intercept enable ``` The following example disables SSL interception on a network port pair: ``` hostname (config) # no policymgr interface A ssl-intercept enable ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.0.