--- title: "policymgr interface <port-pair-name> ssl-intercept tcp port <port_number>" slug: "policymgr-interface-port-pair-name-ssl-intercept-tcp-port-port-number" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:18Z published: 2026-08-04T17:23:18Z canonical: "docs.trellix.com/policymgr-interface-port-pair-name-ssl-intercept-tcp-port-port-number" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # policymgr interface <port-pair-name> ssl-intercept tcp port <port_number> Adds or deletes a TCP port on a network port pair for SSL interception. > [!NOTE] > Note > > By default, port 443 is used as the TCP listener to check for incoming connection requests. The TCP listener receives secure HTTPS connections between the client and the back-end server on one port pair. You can specify a maximum of 8 TCP ports for SSL interception. For details about how to add or delete a TCP port on a network port pair , see the "Configuring SSL Interception" chapter of the Network Security User Guide. ### Syntax `[no] policymgr interface <port-pair-name> ssl-intercept tcp port <port_number>` ### Parameters `no` Use the no form of this command to delete a TCP port from a port pair. `<port-pair-name>` Designation that is configured on the appliance interface. `<port_number>` The TCP port number to intercept HTTPS traffic on one port pair. ### Example The following example shows how to add a TCP port on a network port pair for SSL interception on the Network Security appliance. ``` hostname (config) # policymgr interface A ssl-intercept tcp port 443 ``` The following example show how to delete a TCP port from a port pair on the Network Security appliance. ``` hostname (config) # no policymgr interface A ssl-intercept tcp port 443 ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.2. The `policymgr interface ssl-intercept tcp port` command was changed to the `policymgr ssl-intercept config tcp port` command in Release 8.2.1.