--- title: "policymgr interface qinq evlan" slug: "policymgr-interface-qinq-evlan" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:18Z published: 2026-08-04T17:23:18Z canonical: "docs.trellix.com/policymgr-interface-qinq-evlan" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # policymgr interface qinq evlan Optimizes QinQ performance on the NX 7400 and NX 7500 appliance models and configures the interface QinQ flag. (This parameter does not apply pertain to other models, which are automatically configured for optimal performance.) > [!NOTE] > Note > > You can add an ether type even if the`evlan` parameter is set to `disable`, but the optimization will not take effect until it is set to `enable`. ### Syntax `policymgr interface <port-pair-name> qinq evlan {disable | enable}` ### Parameters `<port-pair-name>` Designation (A or B) that is configured on the appliance interface. `evlan` Configures the interface QinQ flag. `{disable}` Disables QinQ. `{enable}` Enables QinQ. ### Examples The following example enables QinQ support. ``` hostname (config) # policymgr interface A qinq evlan enable ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - Network Security: Release 7.4.0