--- title: "policymgr layer3-mode enable" slug: "policymgr-layer3-mode-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:18Z published: 2026-08-04T17:23:18Z canonical: "docs.trellix.com/policymgr-layer3-mode-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # policymgr layer3-mode enable Enables layer 3 mode on supported Network Security appliance deployed on an EXSi host, KVM server, or Hyper-V server. (If the appliance is in a cloud deployment, layer 3 mode is always enabled.) ### Syntax `policymgr layer3-mode enable` `no policymgr layer3-mode enable` ### Parameters `no` The `no` form of this command disables layer 3 mode. ### Example The following example enables layer 3 mode: ``` hostname (config) # policymgr layer3-mode enable ``` `hostname (config)# policymgr layer3-mode enable` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 9.0