--- title: "policymgr ssl-intercept config alpn enable" slug: "policymgr-ssl-intercept-config-alpn-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:18Z published: 2026-08-04T17:23:18Z canonical: "docs.trellix.com/policymgr-ssl-intercept-config-alpn-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # policymgr ssl-intercept config alpn enable Enables Application-Layer Protocol Negotiation (ALPN). ALPN is enabled by default. Use this command to enable ALPN if it is disabled. Application-Layer Protocol Negotiation (ALPN) is a Transport Layer Security (TLS) extension that allows the application layer to negotiate which protocol should be performed over a secure connection in a manner that avoids additional round trips and which is independent of the application-layer protocols. It is used to establish HTTP/2 connections without additional round trips. For details about how to configure the advanced SSL settings for SSL interception, see the "Configuring SSL Interception" chapter of the Network Security User Guide. ### Syntax `[no] policymgr ssl-intercept config alpn enable` ### Parameters `no` Use the `no` form of the command to disable ALPN. ### Examples The following example enables ALPN: ``` hostname (config) # policymgr ssl-intercept config alpn enable ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 10.0