--- title: "policymgr whitelist port enable" slug: "policymgr-whitelist-port-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:18Z published: 2026-08-04T17:23:18Z canonical: "docs.trellix.com/policymgr-whitelist-port-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # policymgr whitelist port enable Enables or disables a port allowlist. > [!NOTE] > Note > > When you enable a port allowlist, traffic on these ports will not be submitted for further analysis. All the ports that match the known port entries are allowlisted. When a port allowlist is disabled on the Network Security appliance traffic from the ports is submitted for analysis. > [!WARNING] > Important > > The port allowlist is disabled by default. ### Syntax `[no] policymgr whitelist port enable` ### Parameters `no` Use the `no` form of this command to disable the port allowlist. ### Example The following example enables the port allowlist on the Network Security appliance. ``` hostname (config) # policymgr whitelist port enable ``` The following example disables the port allowlist on the Network Security appliance. ``` hostname (config) # no policymgr whitelist port enable ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.0