--- title: "Prepare your cluster for virtual IP" slug: "prepare-your-cluster-for-virtual-ip-2" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-09-09T11:38:09Z published: 2026-09-09T11:38:09Z canonical: "docs.trellix.com/prepare-your-cluster-for-virtual-ip-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Prepare your cluster for virtual IP Before you begin, ensure your system meets the following requirements: - You must have a unique virtual IP address that is not used anywhere else in your network. - The commands must be run on a node that has the broker role enabled. This node will become the primary broker. - In case of two node clusters, ensure both the nodes are brokers. Failover does not happen between broker and compute nodes. - You must have a free IP address on your submission interface network that can be used as the virtual IP. - Virtual IP does not support IPv6 addresses. - If your management interface and submission interface are on different subnets, the virtual IP address must be on the same subnet as the submission interface. **Configuring your virtual IP** 1. [Enable the virtual IP](/network-and-platform/docs/prepare-your-cluster-for-virtual-ip-2#enable-the-virtual-ip). 2. [Verify the virtual IP configuration](/network-and-platform/docs/prepare-your-cluster-for-virtual-ip-2#verify-the-virtual-ip-configuration). 3. [Disable the virtual IP](/network-and-platform/docs/prepare-your-cluster-for-virtual-ip-2#disable-the-virtual-ip). 4. [Change the virtual IP address](/network-and-platform/docs/prepare-your-cluster-for-virtual-ip-2#change-the-virtual-ip-address). ### Enable the virtual IP This explains how to enable the virtual IP address for your cluster. 1. Enter CLI configuration mode. ```plaintext hostname > enable hostname # configure terminal ``` 2. Enable the virtual IP using the following command: ```plaintext hostname (config) # mvx cluster vip netmask enable ``` For example, **hostname (config) # mvx cluster vip 10.213.248.85 netmask /24 enable** When you run this command, the system: - Ensures the virtual IP always operates in the submission interface. - Checks if the specified virtual IP is free on the submission interface network. If the IP is in use, an error is returned. - Assigns the VIP to the specified submission interface of the current broker node. This node is set as **VIP owner**. ### Verify the virtual IP configuration After enabling the feature, verify that the virtual IP is assigned correctly and that the cluster recognizes the VIP owner. 1. Display the detailed cluster status to identify the VIP owner. The output will show the node role as broker (VIP owner) for the active node. ```plaintext hostname # show mvx cluster status detail ``` Sample output: ```plaintext IVX Cluster Nodes:    Node Name           : vx3100-109    Node Health         : ready    Node Role           : broker    SSH port            : 22    Node Utilization    : 0 %    Node Name           : vx-173    Node Health         : ready    Node Role           : broker (VIP owner)    SSH port            : 22    Node Utilization    : 0 %    Node Name           : vx6200-101    Node Health         : ready    Node Role           : broker    SSH port            : 22    Node Utilization    : 0 % ``` 2. Display the configured virtual IP details. ```plaintext show mvx cluster vip config ``` Sample output: ```plaintext Virtual IP Configuration: Virtual IP      : 10.1.1.3 Netmask         : 24 ``` > [!NOTE] > Note > > You can access the SSH and web UI using the virtual IP. You cannot configure the virtual IP from the CMS. ### Disable the virtual IP This disables the high availability feature and removes the virtual IP from the cluster. 1. Enter CLI configuration mode. ```plaintext hostname > enable hostname # configure terminal ``` 2. Disable the virtual IP feature. ```plaintext hostname (config) # no mvx cluster vip enable Removed virtual IP configuration successfully. ``` ### Change the virtual IP address To change the virtual IP address, you must first disable the current VIP configuration and then re-enable the feature with the new IP address. 1. Enter CLI configuration mode. ```plaintext hostname > enable hostname # configure terminal ``` 2. Disable the current virtual IP. ```plaintext hostname (config) # no mvx cluster vip enable ``` 3. Enable the feature with the new virtual IP address. ```plaintext hostname (config) # mvx cluster vip netmask enable ```