--- title: "Preparing an appliance to send a management request" slug: "preparing-an-appliance-to-send-a-management-request-4" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-09-07T20:58:07Z published: 2026-09-07T20:58:07Z canonical: "docs.trellix.com/preparing-an-appliance-to-send-a-management-request-4" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Preparing an appliance to send a management request Use the commands in this section to prepare an appliance to send a request for management to the Central Management System appliance. **To prepare to send a request:** 1. Log in to the requesting appliance CLI. 2. Go to CLI configuration mode: ``` appl-hostname > enable appl-hostname # configure terminal ``` 3. Enable automatic rendezvous attempts: ``` appl-hostname (config) # cmc rendezvous client auto ``` 4. Verify that the auto connect feature is enabled: 1. View appliance (client) information: ``` appl-hostname (config) # show cmc client ``` 2. If `Autoconnect: no` is shown, enable auto connect: ``` appl-hostname (config) # cmc client connection auto ``` 5. Save your changes. ``` appl-hostname (config) # write memory ```